Filter
Top Products
58
Setup Menu
Setting the Setup Menu
Settings made in the setup menus are stored in this DVD recorder’s internal memory and will be retained even when the power is
turned off. It is also possible to return to default settings whenever so required.
In addition to the buttons on the front panel, a keyboard can also be used to perform operations on these menus. The following
section, however, will describe operations performed using the front panel buttons.
Keyboard : Select using the arrow keys (∞ and √), and confirm the selection using the Enter key.
Setup menu operations are carried out while monitoring the display on the monitor
connected to the VIDEO LINE OUT or Y/C OUT terminal. In addition, setup menu
content also appears on the LCD display.
Ⅵ Stop the DVD recorder.
1.
Open the Setup Menu screen.
To do this, press the SET UP button
2.
Open the setup menu in which settings are to be modified.
q Use the 6 and 7 buttons to select the required screen.
w Press the SET button
* The EXIT option can be selected to return to the normal screen display.
3.
Make the required settings in the setup menu.
q Use the 6 and 7 buttons to select the parameter to be set.
w Press the SET button
● A list of setting values will appear.
e Use the 6 and 7 buttons to select the required value from the list and then
press the SET button.
● The setting value will be modified accordingly.
r Repeat steps q through e until all of the required settings have been
made.
Ⅵ To return to the Setup Menu, select MENU and press the SET button.
Ⅵ To move to the next menu screen, select the † button at the top of the current
screen and press the SET button.
Ⅵ To return to the original menu screen, select either MENU or BACK and press
the SET button.
4.
Use either of the following methods to return to the normal screen
display.
Press the SET UP button.
or
Select EXIT from the Setup Menu and press the SET button.
Settings
MENU
SETUP
OFF
TEST SIGNAL
OFF
FACTORY SETTING
EXECUTE
KEYBOARD STYLE
ENGLISH
PLAYBACK & 232C TYPE
DVD
TOTAL RECORDING TIME
5 Hour 30 Min
SYSTEM MENU (1/2)
Restoring to Default Settings
All settings from the various setup menus can be returned to the corresponding
default settings by setting FACTORY SETTING from the SYSTEM MENU screen
to EXECUTE and by then pressing the SET button.
* The current set values for the TV TYPE item on the SYSTEM MENU (2/2) screen
will not be erased.
BUSY
OPEN/CLOSE
TOP
MENU MENU
OPTION DV Y/CLINE
SET UP
SET
EXIT
DISC
INPUT SELECT
SYSTEM
DVD MENU
RECORDER
REMOTE
DISPLAY
CLOCK ADJUST
NETWORK
MENU
CHAPTER CREATION
MANUAL
SET INTERVAL
Every05Min
AUTO CHAPTER (RECPAUSE)
ON
ENCODE QUALITY
SP
AUDIO ENCODE
DOLBY DIGITAL
RECORDER MENU (1/2)
SET button
Cursor buttons
(6, 7, 8 and t)
SET UP button
Setup Menu
RECORDER MENU (1/2) screen
Setting list
SYSTEM MENU screen
MENU
CHAPTER CREATION
MANUAL
SET INTERVAL
AUTO CHAPTER (RECPAUSE)
ENCODE QUALITY
SP
AUDIO ENCODE
DOLBY DIGITAL
RECORDER MENU (1/2)
AUTO
59
Setup Menu Configuration
The Setup Menu screen is displayed on both the monitor and LCD display. As shown below, this screen is used to access this DVD
recorder’s setup menus.
MENU
HOST NAME
bdx201m
STATIC
IP ADDRESS SETTING
255..255.255.0
192.168.0.254
192.168.0.2
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MAC ADDRESS
NETWORK MENU
99.99.99.99.99
EXIT
DISC
INPUT SELECT
SYSTEM
DVD MENU
RECORDER
REMOTE
DISPLAY
CLOCK ADJUST
NETWORK
MENU
INPUT SELECT
LINE
INPUT SELECT MENU
MENU
SETUP
ON
TEST SIGNAL
OFF
FACTORY SETTING
CANCEL
KEYBOARD STYLE
ENGLISH
PLAYBACK & 232C TYPE
DVD
TOTAL RECORDING TIME
5 Hour 30 Min
SYSTEM MENU (1/2)
MENU
DISPLAY
ON
TITLE/CHAPTER/INDEX
OFF
RECORDER MODE
OFF
OFF
TIME/DATE
REMAIN
OFF
DATE STYLE
MM/DD/YY
LCD
TITLE+CHAPTER
DISPLAY MENU
MENU
DATE
04/12/04
10:00
TIME
CLOCK ADJUST MENU
MENU
FINALIZE
CANCEL
OFF
CANCEL
OFF
CANCEL DISC FINALIZATION
AUTO FINALIZE
AUTO CANCEL DISC FINALIZ.
DISC MENU
CANCEL
CANCEL
DISC ERASE
DISC ERASE
CANCEL
LAST TITLE ERASE
(
QUICK
)
(
FULL
)
MENU
CHAPTER CREATION
MANUAL
SET INTERVAL
Every05Min
RECORDER MENU (1/2)
AUTO CHAPTER (REC PAUSE)
ON
ENCODE QUALITY
SP
AUDIO ENCODE
DOLBY DIGITAL
ASPECT
AUTO
INDEX CREATION
MANUAL
BACK
AUDIO CHANNEL (DV)
1,2ch † 1,2ch
AUDIO REC VOLUME MODE
BOTH
RECORDER MENU (2/2)
BACK
AC IN MODE
ON
SYNC SYSTEM
AUTO
TV TYPE
NTSC
VBID OUT(WIDE)
OFF
Y/C TERMINAL MODE
S1
OPERATION LOCK
OFF
SYSTEM MENU (2/2)
MENU
EDIT MENU
DISABLE
STYLE
TYPE1
TITLE PATTERN
1
CHAPTER PATTERN
1
THUMBNAIL FORM
NORMAL
DVD MENU TYPE
DISC IN ACTION
TITLE END
TOP
TITLE
NEXT TITLE
DVD MENU
MENU
REMOTE SELECT
FOOT SW1
OFF
OFF
OFF
OFF
REC CONTROL
FOOT SW2
232C BAUDRATE
9600
TYPE1
232C PROTOCOL TYPE
REMOTE MENU
Setup Menu (☞ Page 60 )
DISC MENU screen (☞ Page 61)
SYSTEM MENU (2/2) screen
(☞ Page 64)
DVD MENU screen (☞ Page 65)
SYSTEM MENU (1/2) screen
(☞ Page 62)
RECORER MENU (1/2) screen
(☞ Page 67)
RECORER MENU (2/2) screen
(☞ Page 68)
REMOTE MENU screen (☞ Page 69)
DISPLAY MENU screen (☞ Page 71)
NETWORK MENU screen (☞ Page 72)
CLOCK ADJUST MENU screen
(☞ Page 72)
INPUT SELECT MENU screen
(☞ Page 62)