Filter
Top Products
No.51843
C-T1421
5
8.RESET- Button - Press to reset the On-Screen picture
adjustments, clock setting and ON/OFF timer setting.
9.TV/AV Button - Switches between the TV and external
input sources.
10.CALL - Displays the current status time, channel (or
Input), the present settings on the TV screen.
11.MUTING Button - Press to turn off the sound. Press
again to turn the sound back on.
12.VOL
/ Buttons - Press the button to increase,
or the
button to decrease the volume level.
13.ENTER Button - Press to enter selected setup.
14.TV/CAP/TEXT (Closed Caption) Button - Switches
between Caption, Text and TV modes for Closed-
Captioned programs.
15.CH. 1/2 Button - Switches between Channel 1 and
Channel 2 in the Closed Caption mode.
TV/AV CH. 1/2
MENU
VOL
SLEEP MUTING
QUICK VIEW CALL
VOL
ENTER
CH
CH
123
456
7
0
89
–
SET
+
TV/CAP/
TEXT
RESET
POWER
REMOTE CONTROL
1.POWER Button - Press to turn the TV on or off when
the TV is standby mode.
2.10-key pad - Allows direct access to any channel.
3.QUICK VIEW Button - Switches between the present
channel and the last channel selected.
4.SLEEP TIMER Button - Sets the TV to turn off auto-
matically after up to 120 minutes.
5.CH
/ Buttons - Press the button to change to
a higher numbered channel set into memory. Press the
button to change to a lower numbered channel set
into memory.
(Power on function) - You can also turn on the TV by
pressing the CHANNEL
or button on the remote
control when the TV is in standby mode.
6.MENU Button - Press to display the On-Screen menu
function.
7.SET +/– Buttons - Press to select the desired setting
during On-Screen operations.
2
3
12
14
1
5
4
13
11
10
6
7
8
9
15
4
AUDIO
AV1 IN
VIDEO
POWER
VOLUME
SET ENTER RESET
MENU
CHANNEL
STAND BYON TIMER
VIDEO
—
AV2 IN
—
AUDIO
EARPHONE
ON/ OFF
– +
– + – +
POWER
VOLUME
SET ENTER RESET
MENU
CHANNEL
STAND BY ON TIMER
VIDEO
—
AV2 IN
—
AUDIO
EARPHONE
ON/OFF
– +
– + – +
FEATURES
LOCATION OF CONTROLS
• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are
available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies plus
up to 113 cable channel frequencies. The actual number of channels received depends upon channel reception in
your area or your cable system.
• On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or Portuguese.
• ON/OFF Timer - Allows you to automatically turn on or off your TV at a set time.
• Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off
automatically.
• Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of
BRIGHTNESS, COLOR, CONTRAST, SHARPNESS, TINT.
• Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired
viewers.
• Front Video Input Jacks - A VCR or other video device may be hooked up.
• Auto Voltage - This TV can be used from a household 110V-240V, 50/60Hz.
4. STAND BY Indicator - This indicator lights up showing
the unit is in standby mode.
5. ON TIMER Indicator - This indicator lights up when ON
TIMER program is turned ON.
6. Remote Sensor - Signals from the Remote Control unit
are received here.
7. AV 2 IN Jacks (Front) - Audio and video signal cables
from an external source can be connected here.
8. EARPHONE Jack - Plug an earphone with an 1/8
miniplug into this jack for listening.
9. AC Power Cord - Connect to the AC outlet.
10. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
11. AV 1 IN Jacks (Rear) - Audio and video signal cables
from an external source (ex. VCR) can be connected
here.
1. POWER Button - Press the POWER button on the front
panel to put the TV into standby mode.
2. VOLUME +/– Buttons - Press to raise or lower the
volume of the sound.
(MENU Buttons) - Press the both buttons to display the
On-Screen menu function.
(SET +/ – Buttons) - Press to select the desired setting
during On-Screen operations.
3. CHANNEL +/– Buttons - Press to select a higher or
lower numbered channel set into memory.
(Power on function) - You can also turn on the TV by
pressing the CHANNEL + or – button on the front panel
when the TV is in standby mode.
(ENTER Button) - Press to enter or select information
for On-Screen operations.
(RESET Button) - Press to reset the On-Screen picture
adjustments to their factory preset positions.
BACKFRONT
10 11
13257
9
84 6