Filter
Top Products
No.51843
C-T1421
13
CLOSED CAPTION
Text: The Text Closed Caption Mode will usually fill 1/2 of
full screen with a programming schedule or other
information. After selecting a Closed Caption Mode, it will
stay in effect until it is changed, even if the channel is
changed. If the Captions signal is lost due to a commercial
or a break in the signal, the Captions will reappear when
the signal is received again. If the channels are changed,
the Captions will be delayed approximately 10 seconds.
The Captions will appear in places on the screen where
they will least interfere with the picture, usually on the
bottom of the screen. News programs will usually show
three-line Closed Captions which scroll onto the screen.
Most other shows provide two or three lined Captions
placed near the character who is speaking so the viewer
can follow the dialogue. Words in italics or underlined
describe titles, words in foreign languages or words
requiring emphasis. Words that are sung usually appear
enclosed by musical notes. For television programs
broadcasting with Closed Captions, look in your TV guide
for the Closed Captions symbol (CC).
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display
Closed Captioned television programs. Closed
Captioning will display text on the screen for hearing
impaired viewers or it will translate and display text in
another language.
TO VIEW CLOSED CAPTIONS
Press the TV/CAP/TEXT button on the remote control to
switch between normal TV and the two Closed Caption
Modes (Captions and 1/2 of Full Screen Text).
Captions: This Closed Caption Mode will display text on
the screen in English or another language (depending on
the setting of the Closed Captions CH. 1/2 button).
Generally, Closed Captions in English are transmitted on
Captions Channel 1 and Closed Captions in other
languages are transmitted on Captions Channel 2.
• When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears
on the screen.
• Closed Captioned text is only displayed in locations where it is available.
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed
Captioning, especially with live programs. This is because during live programs, captions are also entered live.
These transmissions do not allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume and MUTING may not be seen or may
interfere with Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may
appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an
outdoor antenna.
12
CONTRAST COLORBRIGHTNESS
TINTSHARPNESS
(NTSC only)
PICTURE ADJUSTMENTS
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode
appears on the screen (except the adjusting component).
4
Press the SET + or – button to adjust the setting.
Press the MENU button.
Press the SET + or – button
until the indicator next to
"PICTURE" begins to flash,
then press the ENTER button.
Press the ENTER button
repeatedly to select the
item you want to adjust.
You can adjust the settings for color, sharpness, con-
trast, brightness, tint (NTSC only) and component.
1
2
3
LANGUAGE / IDIOMA
CH SET UP
PICTURE
CLOCK SET
ON/OFF TIMER
M E N U
COLOR AUTO
〈
+ / — / ENTER / MENU
〉
BRIGHTNESS 0
〈
+ / — /
ENTER / RESET / MENU
〉
NOTE: The on-screen display will disappear 6 seconds
after finishing an adjustment. The settings can
only be adjusted when they are displayed on
the TV screen.
CALL button
Press the CALL button to display the current informations on the screen.
The Sleep Timer can turn the TV off for you after you fall
asleep. Program it to work in intervals of 10 minutes, for
a total time of up to 120 minutes.
SLEEP TIMER button
• To change the sleep timer setting:
Press the SLEEP button repeatedly until the display
turns to desired time.
• To cancel the sleep time:
Press the SLEEP button repeatedly until the display
turns to 0.
SLEEP
120
BRIGHTNESS
CONTRAST
COLOR
TINT (NTSC only)
SHARPNESS
+
increase brightness
increase contrast
be brilliant color
be greenish color
decrease brightness
decrease contrast
be pale color
be reddish color
makes picture softer
makes picture clearer
–
*
This indication dose not appear when the Closed Capition is not active.
**
In the AV mode, “AV 1” or “AV 2” continues to display when there is no signal.
8 : 30
CAPTION CH1
CAPTION CH1
PAL-M CH 012
CLOCK
Press Once
Color System
Channel No.
Closed Caption*
Press Twice
Clear the current
informations**
Press 3 times
Closed Caption*