Filter
Top Products
4
Getting Ready to Copy to a DVD!
A Get ready a recommended disc
Use DVD-R, DVD-RW or DVD-R DL dis c of the brands listed below.
DVD+R, DVD+RW and DVD-RAM discs cannot be used.
B Connect
C Press the power button to turn on the burner
• The power lamp changes from blinking orange to steady orange.
DVD-R DVD-RW
DVD-R DL (Single-
sided double layer)
Brand
JVC, TDK,
Verbatim, SONY
JVC JVC, Verbatim
•DVD-R DL (single-sided double layer) discs can be used only when the
burner is connected to a high definition Everio camera.
•Use a commercially available cleaning cloth to wipe the disc gently if
there are any fingerprints or dirt. Applying too much strength will result in
scratches.
• Do not use discs that are scratched.
• When an AVCHD disc (P. 15) is inserted into a device that is not AVCHD-
compatible, you may not be able to eject the disc. To eject the disc, refer to the
instruction manual of you r device.
Caution
Use the AC adapter to
power on the Everio
camera.
Power button
To DC jack
USB cable
To DC jack
Protrusion
Insert the connector with the
protrusion to the burner.
Power lamp
CU-VD50
Everio
Basic Guide
CU-VD50U.book Page 4 Tuesday, June 17, 2008 9:45 AM