JVC DR-MH20S DVR User Manual


 
Masterpage:Right0
EN 67
Filename [DR-MH30US_10Subsidiary.fm]
Page 67 Thursday, 8 July 2004 15:30
SUBSIDIARY SETTINGS
Various modes of this unit are categorized into menus nested in 2
levels shown in the following table. To change the settings of these
modes, find the desired mode in the menu (for details on each
menu, see pages 67 through 68), then follow the procedure below.
The procedure below shows how to set the desired option of the
2ND AUDIO REC mode as an example.
1 Press SET UP to access the Main Menu screen.
2 Press we to select FUNCTION SET UP, then press t.
3 Press we to select REC/PLAY
SET UP, then press t.
4 Press rt to select 2ND
AUDIO REC, then press ENTER.
5 Press rt to select the desired
option, then press ENTER.
6 Press SET UP to complete the
setting.
*The boldface settings below indicate the settings at your purchase.
AUDIO OUTPUT
8 DIGITAL AUDIO OUT DOLBY DIGITAL/PCM / STREAM/
PCM / PCM ONLY
Set to the appropriate mode according to the type of the device
connected to DIGITAL OUT connector.
DOLBY DIGITAL/PCM: Select this when you connect the digital
input connector of a Dolby Digital Decoder or an amplifier with a
built-in Dolby Digital Decoder.
STREAM/PCM: Select this when you connect the digital input
connector of an amplifier with a built-in DTS, Dolby Digital, or
MPEG multichannel decoder.
PCM ONLY: Select this when you connect the linear PCM digital
input of other audio equipment (amplifier, MD or DAT deck, etc.).
NOTES:
This setting functions also when HDD is active.
If you watch or play back a title which contains multiple audio
languages, select PCM ONLY in advance and choose main or sub
audio with AUDIO.
8 ANALOG AUDIO OUT STEREO / DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
STEREO: Select this when listening to conventional two-channel
stereo audio with the units AUDIO OUTPUT connectors
connected to a stereo amplifier/receiver or TV set, or in case you
want to record the audio from a DVD VIDEO disc to a Mini Disc,
etc.
DOLBY SURROUND: Select this when listening to multichannel
surround audio with the units AUDIO OUTPUT connectors
connected to an amplifier/receiver with a built-in surround
decoder or a surround decoder.
8 D. RANGE CONTROL NORMAL / WIDE RANGE /
TV MODE
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a program
encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
NORMAL: Normally select this setting to activate this function.
WIDE RANGE: Select this to deactivate this function when you
enjoy wide dynamic range program.
TV MODE: Select this when you hear the sound through the TVs
speaker(s).
NOTES:
This function takes no effect on programs other than that recorded in
Dolby Digital format.
This function dose not work when Simulated Surround Effect is
activated. (pg. 34)
The effect of NORMAL and WIDE RANGE may not be different
depending on discs.
8 OUTPUT LEVEL STANDARD / LOW
You can lower the output level of analog audio to accommodate the
unit to the connected A/V equipment.
STANDARD: Normally select this setting.
LOW: The output level of analog audio is lowered.
Mode Set
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
DVD VIDEO SET UP LANGUAGE SET (pg. 21)
AUDIO OUTPUT (pg. 67)
PARENTAL LOCK (pg. 36)
DISC PLAY SET UP (pg. 68)
HDD/DVD SET UP
HDD SET UP
(pg. 68)
DVD SET UP (pg. 68)
DISC SET UP ( pg. 71, 72)
FUNCTION SET UP
REC/PLAY SET UP
(pg. 68)
DISPLAY SET (pg. 69)
VIDEO IN/OUT (pg. 26, 68)
INITIAL SET UP TUNER SET (pg. 23)
STB SET (pg. 24)
CLOCK SET (pg. 22)
rtwe
ENTER
SET UP
CABLE/DBS
DVDTV
AUDIO
2ND AUDIO REC
XP MODE REC AUDIO
OFF
DOLBY DIGITAL
JUMP TIME 15MIN
FUNCTION SET UP
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
DISPLAY SETREC/PLAY SET UP VIDEO IN/OUT
DVD VIDEO SET UP INITIAL SET UPHDD/DVD SET UP
DR-MH30US_00.book Page 67 Thursday, July 8, 2004 3:32 PM