Filter
Top Products
PAGE 2
REAR CONNECTOR PANEL
The rear connector panel features a 6-pin
FireWire port for DV video I/O (A), a 6-pin
FireWire port for connection of external
FireWire drives or a computer (B), a 4-pin
XLR DC power input (C) and a 3.5mm
control cable input for RS232C, GPI or wired
remote control (D).
MOUNTING TO A CAMCORDER
The FireStore DR-DV5000 is designed to
mount directly to full size JVC Professional
DV camcorders. When mounted to JVC GY-
DV5000/ 5000E/ 5001 camcorders, the DR-
DV5000 “hooks” to the rear of the camcorder
in the usual position of the battery. To mount
to a Professional DV series camcorder, do
the following:
1) Remove and disconnect the attached battery
system from the camcorder (including battery
plate if applicable).
2) Ensure that
appropriate
power
connectors are
connected and
that the battery
gasket is
positioned
between DR-
DV-5000 and
camera.
3) “Hook” the
DR-DV5000
to the rear
of the the
GY-DV5000
camcorder.
4) (If you are using a JVC DV500/550/700
camcorder, first install the supplied “Hook” plate
to the rear of the
camcorder using the
supplied screws).
Once DR-DV5000
is connected to the
“hook” plate, the
52-pin connector
should mount to the
equivalent on the
GY-DV5000 series.
This connector does
not exist on other
camcorders.
FireStore DR-DV5000 QuickStart Guide
(A)
(D)
(B)
(C)