Filter
Top Products
Filename [M150SEK_10Subsidiary.fm]
Masterpage:Left+
66 EN
SUBSIDIARY SETTINGS
1 Press SET UP to access the Main Menu screen.
2 Press selection keys to select AINITIAL SET UPB, then press
ENTER.
3 Press selection keys
to select ACLOCK
SETB, then press
ENTER.
4 Press selection keys
to select AYEARB, then
press ENTER. Press
selection keys to set
the year, then press
ENTER.
● Repeat the same
procedure to set the date and time.
● When you set the date, press and hold FG to change the date
by 15 days interval.
● When you set the time, press and hold FG to change the time
by 30 minutes interval.
5 Press selection keys to select AJUST CLOCKB, then press
ENTER. Press selection keys to set to the desired mode, then
press ENTER.
● The default setting is AONB.
● If you set to AOFFB, you can disregard the next step as you
won’t be able to receive regular clock adjustments.
6 Press selection keys to select ATV PROGRAMMEB
, then press
ENTER. Press selection keys to set the channel position to the
number representing the station transmitting clock setting data,
then press ENTER.
● The unit is preset to receive clock setting and adjustment data
from the channel selected in this step (step 6).
7 Press SET UP to start the clock operation.
NOTES:
● Just Clock adjusts the unit’s built-in clock automatically when it is
set to AONB.
● Just Clock is not effective when:
^ the unit’s power is on.
^ the unit is in the Timer mode.
^ a difference of more than 3 minutes exists between the built-in
clock’s time and the actual time.
^ the unit is in the Automatic Satellite Programme Recording
mode. (A pg. 42)
^ AL-2 SELECTB is set to ASAT VIDEO/RGBB or ASAT S-VIDEO/
RGBB. (A pg. 58)
● If Just Clock is set to AONB, the unit’s clock is automatically
adjusted at the start/end of Summer Time.
● Just Clock may not function properly depending on the reception
condition.
Just Clock
The Just Clock function provides accurate time keeping through
automatic adjustments at regular intervals, by reading data from
digital tuner signal.
The Just Clock option can be set to AONB or AOFFB at the Clock Set
screen. (The default setting is AONB.)
IMPORTANT:
● If you set Just Clock to AOFFB, time correction will not be
performed, which could adversely affect timer recording. We
recommend you to keep Just Clock set to AONB.
● If you set Just Clock to AONB, automatic time acquisition is
performed even when the unit is turned off. As part of the circuitry
of this unit is turned on during this intervals, the fan functions and
a spinning sound is generated.
Clock Set
IMPORTANT:
If you performed Auto Set Up (A pg. 17), without ever having set
the clock previously, the unit’s built-in clock is also set
automatically.
Perform the following steps only if ^
^ Auto Clock Set has not been performed correctly by Auto Set
Up.
OR
^ you want to change Just Clock setting. (See AJust ClockB in
the right column)
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Slide the TV/DVD switch to DVD.
SET UP
(FGDE)
ENTER
TV DVD
Selection Keys
DVD SET UP
FUNCTION SET UP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
INITIAL SET UP
YEAR
DATE
2005
05/07 SAT
TIME 18:56
JUST CLOCK ON
TV PROGRAMME 18
EXIT
OK
SELECT
SET UP
CHANNEL SET DTV SETTING CLOCK SET
M150SEK_00.book Page 66 Wednesday, June 15, 2005 4:04 PM