JVC DR-MV2SEU DVD VCR Combo User Manual


 
27
Recording
EN
5 Select “Stereo” or “Bilingual” using
[Cursor U / D], then press [ENTER].
6 Press [SET UP] to exit.
Hint
If you select “Stereo”:
The audio will be recorded as “stereo audio.”
If you select “Bilingual”:
The audio will be recorded as “bilingual audio”
(see next section for more detail).
Setting Bilingual Recording Audio
You can select either “Main” or “Sub” audio to record a
bilingual broadcast in Video mode.
1 In stop mode, press [SET UP].
2 Select “Advanced Setting Menu”
using [Cursor U / D], then press
[ENTER].
If it has already appeared, proceed to step 3.
3 Select “Recording” using
[Cursor U / D], then press [ENTER].
4 Select “Bilingual Recording Audio”
using [Cursor U / D], then press
[ENTER].
5 Select “Main” or “Sub” using
[Cursor U / D], then press [ENTER].
6 Press [SET UP] to exit.
Note
If you are recording onto a VR mode disc, both
“Main” and “Sub” will be recorded regardless of your
setting here. And when you play back, you can
choose either audio format or a combination of both
as your playback audio.
Basic Recording
Follow the steps below to record a TV programme.
1 Turn on the unit and insert a
recordable disc.
Make sure that the TV input is set on the unit.
This operation may take a few moments to
complete.
2 Press [DVD].
3 Select the recording speed using
[REC SPEED].
(See page 23.)
Make sure that the recording format is set to the
desired mode. (See page 25.)
4 Select the desired channel to record
using [PR +/
-
] or [the Number
buttons].
5 Press [DVD REC I] to start
recording.
The mark will be displayed for 5 seconds.
To pause the recording, press [PAUSE p]. Press
[DVD REC I], or press [PAUSE p] again to
restart the recording.
6 Press [STOP S] to stop the
recording.
This operation may take a few moments to
complete.
Hint
You can change the channel while in the REC pause
mode.
Note
Recording starts immediately and continues until the
disc is full or you stop recording.
If the clock is not set, the date and time space next
to title names in the Original or Playlist will be blank.
You cannot mix two formats on DVD-RW discs. If
you insert a previously recorded disc, changing the
recording format is not possible even if you change
it in the Setting menu.
You cannot change the recording speed while in the
REC or REC pause mode.
It is possible to record video only in the PAL system.
External input Audio
Bilingual
Stereo
DVD
DVD-RWDVD-RW
Video
DVD-RDVD-R
Bilingual Recording Audio
Sub
Main
DVD
DVD-RWDVD-RW
Video
DVD-RWDVD-RW
VR
DVD-RDVD-R
E9770ED_EN.book Page 27 Wednesday, August 3, 2005 6:35 PM