Filter
Top Products
VCR Functions
66
EN
Other Operations
Press [VCR] first.
To cue or review picture during playback (Picture
Search):
Press [FWD f] or [REV r] during playback.
Press it again and the unit will search in super high
speed.
To freeze the picture on TV screen during
playback (Still mode):
Press [PAUSE p]. Each time you press the button,
the picture will be forwarded frame by frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing the
[PR +/
-
].
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
Counter Reset:
Press [CLEAR].
To play back in slow motion:
Press [VCR SLOW ] during playback or the still
mode. Use [FWD f] or [REV r] to adjust the
speed.
If the noise bars appear on the TV screen, you can
reduce it by pressing
[PR +/
-
].
Note
• Still / Slow / Pause mode will be automatically
cancelled after 5 minutes to prevent damage to the
tape and the video head.
• To return to play back from the Picture Search / Still /
Slow mode, press [PLAY P].
Changing the Video Colour
System
Different countries use different television colour
systems.
This unit will distinguish the video colour system
(MESECAM or PAL) automatically according to the
format of a prerecorded video tape during playback or
the input signal from the tuner or external devices.
To change the video colour system manually, press
[VCR SYSTEM].
Each time you press [VCR SYSTEM], the TV screen
will change as follows.
Note
• If the playback picture on the TV screen is black and
white, change the video colour system manually.
• When you change the video colour system
manually, be sure to change it before recording. If
you select the wrong video colour system for
recording, the colour of the picture may be
deteriorated.
Hi-Fi Stereo Sound System
This unit will record and playback Hi-Fi stereo sound.
This unit will receive stereo and bilingual broadcasts
and it is possible to record in several ways and to play
back the sound.
Selecting the Sound Mode
You can select each mode by pressing [AUDIO] on
the remote control. Each mode is indicated on the TV
screen as following.
• During reception of bilingual broadcasts
Note
• If you play back non-Hi-Fi tapes, the unit will play
back automatically in monaural even if you select
any mode.
• If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.
VCRVCR
AUTO MESECAM PAL
Mode Audio output
Display on
the TV screen
Main Main audio from the both
speakers
Main
Sub Sub audio from the both
speakers
Sub
Main /
Sub
• Main audio from the left
speaker
• Sub audio from the right
speaker
Main
Sub
E9770ED_EN.book Page 66 Wednesday, August 3, 2005 6:35 PM