JVC DR-MV2SEU DVD VCR Combo User Manual


 
9
Before You Start
EN
Rear Panel
1 Mains cable
Connect to a standard AC outlet.
2 AV2 (DECODER) (DVD/VCR)
Connect to VCR, camcorder, or other Audio-
Video equipment. Use a commercially available
Scart cable.
3 AV1 (TV) (DVD/VCR)
Connect to the Scart jack on your TV. Use the
supplied Scart cable.
4 COAXIAL DIGITAL AUDIO OUT jack
(DVD)
Connect to an amplifier with digital input jacks
such as a Dolby Digital decoder or DTS
decoder. Use a commercially available Coaxial
cable.
5 AUDIO OUT jacks (DVD)
Connect to the audio input jacks on your TV.
Use commercially available Audio cables.
6 S-VIDEO OUT jack (DVD)
Connect to the S-Video input jack on your TV.
Use a commercially available S-Video cable.
7 ANTENNA IN (DVD/VCR)
Connect to an antenna or a cable.
8 ANTENNA OUT (DVD/VCR)
Connect to the Aerial jack on your TV, cable box
or direct broadcast system. Use the supplied RF
cable.
Note
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.
This unit does not have an RF modulator.
DVD/VCR
AV2(DECODER)
AUDIO
OUT
IN
OUT
L
R
S-VIDEO
OUT
AV1(TV)
DVD
ANTENNA
DIGITAL
AUDIO OUT
COAXIAL
72134 5 86
E9770ED_EN.book Page 9 Wednesday, August 3, 2005 6:35 PM