JVC DR-MV5SE DVD VCR Combo User Manual


 
Filename [MV5S_07Basic PlayRec.fm]
Masterpage:Left+
28 EN
BASIC RECORDING
Page 28Wednesday, 8 June 2005 10:55
1
Load a cassette with the record safety
tab intact.
The unit’s power comes on automatically and the counter
is reset to 0:00:00.
2
Press VHS/DVD on the unit repeatedly
or VHS on the remote control so that
the VHS lamp lights up on the unit.
3
Press PR +/– or the number buttons to
select the channel you wish to record.
If you record the programmes received by the satellite
receiver ...
1) Select “L-2” by pressing PR +/–.
2) Set the satellite receiver to the appropriate channel.
4
Press REC MODE repeatedly to set the
recording mode.
5
Press 7 on the unit to start recording.
Or while holding 7, press 4 on the
remote control.
If “SUPERIMPOSE” is set to “AUTO” (pg. 79), “MARK”
blinks on the screen while an index code is being marked.
B.E.S.T. takes place at the beginning of both the first SP
and the first LP recording after inserting the cassette.
(
pg. 64)
If “DIRECT REC” is set to “ON”, the programme that
appears on the TV screen will be recorded. (
pg. 79)
6
Press 9 to pause recording.
You can select channel during the Record Pause mode.
To resume recording, press 4.
7
Press 8 to stop recording.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (ITR) (
pg. 63) or timer recording ( pg. 29,
31), the recording will resume automatically when power is
restored to the unit unless the unit’s memory backup has
expired.
Recording Mode
Basic Recording (VHS)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
VHS/DVD
DVDVHS
REC
VHS DVDDUBBING
PR
DV IN
STANDBY/ON
S-VIDEO VIDEO AUDIO
VHS lamp
Recording
mode
Maximum
recording
time
(approx.)
Use
SP 3 hours Select when the picture
quality is important.
LP 6 hours Select when the time is
important. You can record 2
times longer than SP mode.
MV5S_07Basic PlayRec.fm Page 28 Wednesday, June 8, 2005 10:59 AM