JVC DR-MV5SE DVD VCR Combo User Manual


 
Filename [MV5S_08Basic TimerDub.fm]
Masterpage:Left+
46 EN
EDITING
Page 46Wednesday, 8 June 2005 11:00
You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
Example: Dubbing to an MD
1 Connect the unit and a digital audio device using an optional
coaxial cable.
2 Place a disc on the unit and load an MD or CD on the connected
digital audio device.
3 Select the audio to be dubbed.
4 Start playback slightly before the actual point from where you
wish to start dubbing.
5 Press 9 to pause playback.
6 Select the input mode on the connected digital audio device.
7 Press 4 to start playback on the unit.
8 Start recording on the digital audio device.
9 Stop recording on the digital audio device. Then press 8 to stop
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where you
intend editing to start, and where it actually starts.
Digital Audio Dubbing
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
Rear of unit
Digital audio device
(MD deck, etc.)
Coaxial cable
(not provided)
Player
Recorder
To [DIGITAL AUDIO
OUT (COAXIAL)]
MV5S_08Basic TimerDub.fm Page 46 Wednesday, June 8, 2005 11:00 AM