JVC DR-MV5SEK DVR User Manual


 
Masterpage:Right0
EN 29
Filename [MV5SEK_08Basic TimerDub.fm]
Page 29Wednesday, 31 August 2005 19:58
TIMER RECORDING
You can programme each deck to timer-record as many as
8 programmes up to 30 days ahead.
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the PlusCode number.
NOTES:
There may be cases that the VIDEO Plus+ Timer Programming
function prolongs the stop time of the programming.
When two successive programmes are recorded on a DVD-RW disc
with the VIDEO Plus+ Timer Programming function, the beginning of
the second one may be left off the recording.
S
HOWVIEW Timer Programming is not possible on the discs used
exclusively for On-Disc Timer Programming.
If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
To record the programmes received by the satellite receiver, record
on the DVD discs. For details, refer to “Satellite Receiver Users (DVD
Deck Only)” above.
1 Press DVD or VHS to select the deck on which you want to
perform timer programming.
2 For DVD deck
Load a recordable disc.
For VHS deck
Load a cassette with safety tab intact.
3 Press VIDEO Plus+ to access the VIDEO Plus+ screen.
4 Press the number buttons to
enter the PlusCode number of a
programme you wish to record,
then press ENTER.
If you have made a mistake, press
CANCEL and input the correct
number before you press ENTER.
To clear all entered numbers at a
time, press CLEAR (8).
If the number you entered is
invalid, “PLUSCODE NO. ERROR CONFIRM PLUSCODE NO.
THEN RETRY” appears on the TV screen. Input a valid PlusCode
number.
If “GUIDE PROGRAMME IS NOT SET” appears on the TV screen,
set Guide Program numbers manually. (
pg. 83)
When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel some
of the reserved programmes. (pg. 34)
5 The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
programme data.
To cancel this setting, press RETURN.
6 Press we to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
“STOP” (To advance/go back the stop time by 30 minutes, press and
hold rt).
“DAILY/WEEKLY” (pg. 30, “Weekly/Daily Recording”)
“VPS/PDC” (pg. 30, “PDC Recording”)
“REC MODE” (pg. 27, 28, “Recording Mode”)
“NAME” (pg. 67, “Modify Title Name”) (DVD deck only)
7 Press ENTER to access the Programme Confirmation screen.
8 Press ENTER to complete timer programming.
To programme another timer, repeat steps 3 8.
If “PROGRAMME OVERLAPPED” appears on the TV screen, see
page 35.
9 Press TIMER # to engage the unit’s timer mode. The DVD timer
indicator lights up on the unit and the unit is automatically turned
off.
To disengage the timer mode, press TIMER # again.
VIDEO Plus+ Timer Programming
Make sure that the unit’s built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, the wrong channel number will
be displayed on the VIDEO Plus+ programme screen in step 5.
When this happens, set the correct Guide Program number for that
station. (
pg. 83, “VIDEO Plus+ System Setup”)
Satellite Receiver Users (DVD Deck Only)
To timer-record a satellite broadcast using the VIDEO Plus+
system:
A Perform “VIDEO Plus+ Timer Programming”.
B Set the satellite receiver to the appropriate channel before
the selected programme begins.
C Leave the satellite receiver’s power on.
ENTER
CLEAR ( )
DVD
0 – 9
VHS
CANCEL
VIDEO Plus +
TIMER
RETURN
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “VIDEO Plus+ System Setup” ( pg. 83) and
set the Guide Program number correctly.
123
456
789
0
SP
1234
VIDEO Plus+ PRGM
DATE
START
STOP TV PROG
DAILY/WEEKLY
VPS/PDC
ON
NAME
ENTER PLUSCODE NO. WITH [0-9] KEYS
THEN PRESS [ENTER]
OK
REC MODE
PLUSCODE NO.
MV5SEK_00.book Page 29 Wednesday, August 31, 2005 7:58 PM