Filter
Top Products
21
INFORMATION
Settings for the information display of the monitor.
Item Content Setting value
POSITION
Select the position to show the information display (☞ “On the
Information Display” on page 11).
UPPER
LOWER
SOURCE ID Select whether the name assigned in “CHARACTER SET.” is displayed on
the screen (☞ “On the Information Display” on page 11).
• When “AUTO” is selected, the display color synchronizes with the color
of the tally lamp while the tally lamp is lit.
OFF
ON
AUTO
CHARACTER SET. *
1
Assign a name to each video source as you like (10 characters at maximum).
You can also enter a name using the RS-232C system.
Setting of “CHARACTER SET.”
1 Change the input to one that you want to assign a video source
name for.
2 Select “CHARACTER SET.”
3 Press the buttons to select a character to enter at first.
● Each time you press the button, the characters change in the
following order. Press
button to reverse the order.
space
4
Press button to move the arrow to the next space.
● The characters entered before moving the arrow are memorized.
5 Repeat steps 3 and 4 (10 characters at maximum).
6 Press MENU button to store the name.
STATUS DISPLAY Select whether the status of the current input and the setting of MUTING
are displayed on the screen (☞ “On the Status Display” on page 12).
AUTO, OFF, ON
TIME CODE Select the type of the TIME CODE display. VITC *
2
, LTC *
2
, D-VITC
CRC ERROR Select whether the CRC error indication for the input HD SDI/SD SDI signal
is displayed on the screen (☞ “On the Information Display” on page 11).
OFF
ON
SUB HOUR METER Display the hours of use (unit: hour).
You can reset this item.
MODEL Display the model name of the monitor.
VERSION Display the version of the monitor.
HOUR METER Display the total hours of use (unit: hour).
This item is used for maintenance of the monitor. You cannot reset this item.
*
1
Memorized for each input.
*
2
Ancillary time code
all reset
Restores all the settings and adjustments of the monitor to the default.
● “HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.
● If reset while the AC power is on, the monitor turns off (standby), and then turns on automatically.