Filter
Top Products
ENGLISH
22
Standard
Picture Mode
Standard
Bright
Features
Colour Temp.
Hue
Colour
Sharp
Contrast
Cool
Picture
Iris
Picture Mode
Standard
Picture
Display the menu bar
Select a menu
Select an item
Adjust / Configure
Move
The item will change.
Selected menu’s title
Items
Picture
Sound
Features
Set Up
Customising your TV
To the previous
screen
Exit
1
The menu disappears
after one minute of
inactivity.
When adjusting
with the sliding-bar
2
3
4
When selecting
from presets
2 next
1 select
select
2 set
1 adjust /
select
2 set
1 adjust
2 set
1 select
Some items have a sub-menu.
Other settings · Change the aspect ratio “ZOOM” (P. 19)
· Turn on “3D Sound” “3D SOUND” (P. 19)
*1 MaxxBass is a registered trademark of Waves Audio Ltd. in the USA, Japan and other countries.
Menu Item Adjustments / Configurations
Picture
Picture Mode
Picture mode (Bright / Standard / Soft)
Iris
Adjust the amount of light projected on the screen (Darker Brighter)
Contrast
Contrast (Lower Higher)
Bright
Brightness (Darker Brighter)
Sharp
Sharpness (Softer Sharper)
Colour
Colour (Lighter Deeper)
Hue
Tint for NTSC (Reddish Greenish)
Colour Temp.
Colour temperature (Warm / Normal / Cool)
Features
Finer picture adjustments (P. 24)
Sound
Stereo / t · u
Mode / Language (v : MONO / s : STEREO / t : SUB1 / u : SUB2)
Bass
Low tones (Weaker Stronger)
Treble
High tones (Weaker Stronger)
Balance
Speaker balance (Left Stronger Right Stronger)
3D Sound
Ambience level (High / Low / Mono / Off)
MaxxBass
*1
Emphasize the bass sound (Off / Low / High)
Features
Sleep Timer
Timer for turning off the TV (P. 19)
Child Lock
Stops children from watching specific channels (P. 20)
Appearance
Format for displaying the channel number (Type A / Type B)
Blue Back
Displays a blue screen and mute the sound when the signal is weak or
absent (On / Off)
Favourite Setting
Clear favourite channel settings (P. 16)
Illumination
Changes the brightness of the power lamp (P. 6) (Bright / Soft)
Set Up
Auto Program
Select a country, it automatically registers channels (P. 11, ⁄)
Edit / Manual
Change registered channels or add new ones (P. 29)
Language
Select a language for on-screen analogue channel displays and menus
(excluding the DTV menu) (P. 11,
!)
Decoder (EXT-2)
When connected to VCR with “T-V LINK” (On / Off)
Component
Auto Select
Changes the TV input to “EXT-3” when a component signal is input to
“EXT-3” (On / Off) (Not available when viewing PC)
EXT Setting
For use with video players and other devices (P. 17)
HDMI Setting
HDMI CEC : Connect and control multiple HDMI CEC enabled devices with a
single remote (On / Off) (P. 34)
HDMI-1 (EXT-5) : Size (1 / 2 / Auto), Audio (Digital / Analogue / Auto)
HDMI-2 (EXT-6) : Size (1 / 2 / Auto)
Attenuator
When digital channels are not received because of too strong radio waves
(On / Off)
PC Position
PC position adjustment (P. 17)
Lamp Timer Reset
Resets the lamp timer (P. 5)
DTV menu is available only when
watching digital channels. (P. 23)
DTV
LCT2236-001A-A.indb 22LCT2236-001A-A.indb 22 4/5/2007 10:49:51 AM4/5/2007 10:49:51 AM