Filter
Top Products
ENGLISH
5
IMPORTANT! PREPARE USE
SETTINGS
TROUBLE?
Set Up
Auto Program
Decorder(EXT-2)
Component Auto Select
HDMI Setting
On
Off
EXT Setting
Edit/Manual
Language
Lamp Timer Reset
PC Position
Attenuator Off
Set Up
Select “Set Up”
Display the menu bar
Select “Lamp Timer Reset”
Finish
Install the NEW lamp unit
Reinstall the lamp cover
Tighten the screw.
The lamp timer is
reset successfully.
Press OK to reset
the lamp timer.
1
2
3
4
Finally, the lamp has been replaced!
1
3
Turn the TV on
Plug in the TV
Reset the lamp timer
If the lamp unit is not installed securely (e.g. flat
in the lamp housing area), the TV won’t turn on.
In this case, reinstall the lamp unit.
Never dispose of the lamp with normal trash!
The lamp contains a small amount of mercury. The lamp contains a small amount of mercury. Follow the instruction in
“Information for Users on Disposal of Old Equipment” (P.ii to iii).
If the power lamp and LAMP indicator blink rapidly after turning on the TV
“Lamp” (P. 31)
Insert
Make sure the lamp sits securely
and flat in the housing area.
Re-tighten
Unpack
Do not drop the lamp!
Do not shock the glass
surface of the lamp!
It may shatter the lamp causing injuries.It may shatter the lamp causing injuries.
Never touch the
glass surface of the
lamp!
Oils deposited from the finger may Oils deposited from the finger may
cause a difference in temperature cause a difference in temperature
when the lamp heats up to its when the lamp heats up to its
operating temperature, causing operating temperature, causing
the lamp to break.the lamp to break.
2
4
5
6
7
2
next
1
select
2
next
1
select
LCT2236-001A-A.indb 5LCT2236-001A-A.indb 5 4/5/2007 10:49:22 AM4/5/2007 10:49:22 AM