Filter
Top Products
22
q
6
5
/
8
3
PLAYBACK AND RECORDING FEATURES (cont.)
3
¶7
8
1¡
1
2
3
4
5
6
7
8
0
9
Index Search
Index codes are placed on the tape at the start of each
recording. You can find and automatically play back from the
start of any recording using the Index Search function.
FF
REW
FF
REW
PLAY
SKIP SEARCH
SEARCH
START SEARCH
1
While the tape is stopped, press SEARCH T or Y.
ACCESS DISTANT CODE
2
To access a recording 2–9 index codes away, press
SEARCH T or Y repeatedly until the correct
number is displayed on screen (only if SUPERIMPOSE
is set to ON (੬ pg. 20). Playback begins automatically
when the desired recording is located.
● If necessary press REW or FF when play starts to
search visually to find the very beginning of the
desired program.
NOTE:
An index code is not placed on the tape when recording is
paused and then resumed.
Tape Position Indicator
The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW, or
perform an Index Search. The
position of " " in relation to "B"
(Beginning) or "E" (End) shows you
where you are on the tape.
NOTE:
"SUPERIMPOSE" must be set to "ON", or the indicator will not
appear (
੬
pg. 20).
COUNT 0:33:27
BE
+++
Skip Search
SKIP OVER UNWANTED
SECTIONS
1
Press SKIP SEARCH 1 to 4 times during playback. Each
press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search,
press PLAY.
PLAY