Filter
Top Products
36
SPECIAL FEATURES (cont.)
Cable Box Multi-Brand
Remote Control
The VCR's remote control can control functions on the brands
of cable boxes listed below. Some cable box brands have more
than one code. If your cable box does not function with a
specified code, try other codes.
TURN ON THE CABLE BOX
1
Turn the power on using the cable box’s remote control.
ENTER CABLE BOX BRAND
2
While holding down CABLE on the VCR's remote
control, press MBR SET and use the NUMBER keys to
enter the cable box brand number from the chart below
and then press STOP.
Follow the example shown below.
● Once you have set the remote control to operate the
cable box, you don't have to repeat this step until you
replace the remote control's batteries.
OPERATE CABLE BOX
3
First, while holding down CABLE, press POWER to see
if the cable box’s power goes off as it should. If it does,
try other functions.
● To operate your cable box, while holding down
CABLE, press the corresponding button: POWER,
CH5
∞
, NUMBER keys (or ENTER).
● For some brands of cable box, you must press ENTER
after having pressed the NUMBER keys.
NOTE:
Depending on the type of cable box, there may be cases where
some or all functions cannot be operated using the remote control.
3
¶7
8
1¡
1
2
3
4
5
6
7
8
0
9
CABLE BOX BRAND NAME BRAND CODE
CURTIS 09, 10
GEMINI 08
GENERAL INSTRUMENTS 01, 02, 03, 04, 05, 06, 07, 08
HAMLIN 15, 16, 17, 18
JERROLD 01, 02, 03, 04, 05, 06, 07, 08
OAK 19, 20, 21
PANASONIC 24, 25, 26
PIONEER 13, 14
RCA 24, 25, 26
REGAL 15, 16, 17, 18
SAMSUNG 08, 13
SCIENTIFIC ATLANTA 09, 10
SIGMA 19, 20, 21
SL MARX 08, 13
SPRUCER 24, 25, 26
TELEVIEW 08, 13
TOCOM 22, 23
VIDEOWAY 11, 12
ZENITH 11, 12
(Ex.) To set remote control to cable box brand RCA 24:
Release
CABLE
7
STOP
4
2
MBR SET
Hold
down
Press in succession
POWER
MBR SET
CABLE
NUMBER
ENTER
CH
STOP