JVC HR-J265EK VCR User Manual


 
14
123
456
7
89
0
2
4
1
3
?
OK
WEEKLY
7
9
DAILY
6
Express Timer
Programming
BASIC OPERATIONS (cont.)
If you don’t know the PlusCode number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
START+/–
2,3
4
PROG
1,9
ACCESS VIDEO PLUS+
SCREEN
1
Press PROG.
ACCESS PROGRAMME
SCREEN
2
Press START +/–. (If you’re
just starting out, “P1”
appears.)
The front display panel looks like this:
ENTER PROGRAMME
START TIME
3
Press START +/– to enter
the time you want
recording to start.
Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
The front display panel looks like this:
ENTER PROGRAMME
STOP TIME
4
Press STOP +/– to enter the time you want recording to
stop.
Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME
DATE
5
Press DATE +/– to enter the date on which you wish to
record. (The current date first appears on screen. The
date you enter will appear in its place.)
Before performing Express Timer Programming:
Make sure that the recorder's built-in clock is set
properly.
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
STOP+/–
TV PROG+/–
DATE+/–
5
8
PDC
10
SP/LP
– P1 –
START STOP
– –:– – = – –:– –
SP VPS/PDC OFF
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT
– P1 –
START STOP
21:00 = – –:– –
SP VPS/PDC OFF
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT
SP
SP