JVC HR-J265EK VCR User Manual


 
23
ENTREE
ANT. IN
ENTREE/DECODEUR
IN/DECODER
AV2
ENTREE/SORTIE
IN/OUT
SORTIE
RF OUT
ANTENNE
AV1
123
456
7
89
0
2
4
1
3
?
You can use a camcorder as the source player and your video
recorder as the recorder.
Edit From A
Camcorder
MAKE CONNECTIONS
1
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s rear panel AV2 IN or AV1
IN/OUT connector via the optional cable adapter.
SET RECORDER’S INPUT
MODE
2
Press AUX and/or TV PROG to select the appropriate
input mode depending on the connector being used;
"L-1" for the AV1 IN/OUT connector, or "L-2" for the
AV2 IN connector.
SET EDIT MODE
3
See "Picture Control" on page 24.
START CAMCORDER
4
Engage its Play mode.
START RECORDER
5
Engage its Record mode.
Camcorder
Recorder
Player
Audio/Video Cable
(not provided)
VIDEO OUT
AUDIO OUT
TV PROG
NOTES:
All necessary cables can be obtained from your dealer.
When you select EDIT to dub tapes in step 3, be sure to select
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
AUX
Cable adapter
(not provided)