JVC HR-S5990AM VCR User Manual


 
EN 49
(MONO)
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player's AUDIO/VIDEO OUT connector to
the recorder's AUDIO/VIDEO IN connector.
Use the L connector for monaural connection.
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or PR +/ to select depending on the
connector being used — "L-1" for the rear panel
VIDEO/AUDIO input connectors, or "F-1" for the front
panel VIDEO/AUDIO input connectors.
SELECT "EDIT" FOR PICTURE
CONTROL SET MODE
3
Follow the "Picture Control" section on page 47, then
select "EDIT."
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
NOTES:
When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting (
pg. 10).
All necessary cables can be obtained from your dealer.
NTSC tapes being played back in the "NTSC
[
PAL" mode
(
pg. 52) cannot be dubbed to another recorder.
When you dub an NTSC tape using your recorder as the
playback deck, select "NTSC 3.58" (or "NTSC 4.43") for
"NTSC" setting (
pg. 52).
When you select "EDIT" to dub tapes, be sure to select
"AUTO" (or "NORM" when the B.E.S.T. function is set to
"OFF") after you finish dubbing the tapes (
pg. 47).
If you are using another recorder with S-Video and Audio
input/output connectors, you can connect those connectors to
this recorder's S-VIDEO IN/S VIDEO OUT and AUDIO IN/
OUT connectors.
When Using Your Video Recorder As The Source Player ...
... connect its rear panel S VIDEO OUT and AUDIO OUT
connectors to the recording deck's S-Video and Audio input
connectors.
When Using Your Video Recorder As The Recording Deck ...
... connect its front panel S-VIDEO and AUDIO input
connectors to the source player's S-Video and Audio output
connectors. Then, set the recorder's input mode to "S-1".
(MONO)
Another recorder
Recorder
Player
Another recorder
RF Cable (provided)
VIDEO CHANNEL
Your recorderPlayer
TV Receiver
Recorder Your recorder
TV Receiver
RF Cable
(provided)
VIDEO
CHANNEL
IMPORTANT:
To edit, both the player and the recorder must be of the
same colour system. Select the appropriate colour system.
( pg. 52)
For more information on multi-system compatibility,
pg. 52.
AV Cable
(not provided)
AV Cable
(not provided)
HR-S5900/5990AM-EN47-68 5/9/02, 4:57 PM49