JVC HR-S6970AJ VCR User Manual


 
September 15, 2004 11:23 am Page 3
—3—
Master Page: Right
Front Panel
Rear Panel
Remote control
* Not function with this recorder.
On-screen display
If you press ENTER (OK
) on the remote control when “O.S.D.” is
set to “ON” (
13), you can see the current recorder status on the
screen. To clear the on-screen display, press ENTER (OK
) again.
The indications are not recorded even if the recorder is in the
recording mode.
A Operation mode indicators
B Tape speed SP/LP/EP
C Colour system indicator (
13)
D Tape direction
E Counter display
F Tape remaining time indicator
G Audio mode display (
8)
H Tape position indicator (
8)
I Type of broadcast (
9)
J Current day/month/year
K Clock display
L Channel position number/Aux. indicator (L-1, F-1, S-1 or S-2)
M Cassette loaded mark
N S-VHS ET indicator
(S-VHS ET: ON / S-VHS ET: OFF)
Buttons, Connectors and Indicators
To access covered connectors, pull and open the connector
cover.
Cassette loading slot
Display panel
“Timer” indicator
Start Time
indicator
Channel and
auxiliary input/
Clock time*
Infrared beam
receiving window
REVIEW indicator
Counter/Remain
display**
Pause 9
Play 4
Record 7
SP/LP/EP
Stop/Eject 0
REC LINK
Record indicator
S-VHS
indicator
1
Advanced
JOG dial
24H
EXPRESS #
#
Play indicator
Tape speed
SP/LP/EP
Stop Time indicator
S-VHS ET
S-VIDEO/VIDEO/
AUDIO input
connectors
REC LINK
* Each time you press
––:––
, the display panel shows the channel number
and the clock time alternatively.
**The counter can display up to +/– “19:59:59”. If the playback or recording
time exceeds this limit, the display starts to count from “0:00:00”.
Mains power cord
Buttons with a small dot on the left side of the name can also be
used to operate your TV (
15).
CABLE/
SAT/DVD
TV
VCR
number keys
Record 7
Stop 8
Rewind
Play 4
Fast Forward
Pause 9
HR-S6970AG.AJ_EN.fm Page 3 Wednesday, September 15, 2004 11:23 AM