Filter
Top Products
36 EN
EDITING (cont.)
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART (AV) connector to
the recorder’s 21-pin SCART (AV) connector as
illustrated on page 37.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
● If you are using another recorder with S-Video and
Audio input/output connectors, you can connect
them to this recorder's S-IN/S-OUT and AUDIO IN/
OUT connectors.
SET RECORDING DECK’S
INPUT MODE
2
Set to AUX. When using this recorder as the recording
deck, select the appropriate input mode. ੬ "To Select
The External Input Mode" on page 35.
● When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (੬ pg. 35).
SET EDIT MODE
3
See "Editing Mode Setting" on page 34.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
Be sure to set "EDIT" back to "OFF" when you finish editing.
(
੬
pg. 34)
12
45
3
6
8
0
7
9
2
4
1
3
Set the PAL/MESECAM switch to the appropriate position.
੬ pg. 16
PLAY
RECORD