Filter
Top Products
January 24, 2003 11:21 am Page 11
— 11 —
Master Page: Right
Editing with another video recorder or a
camcorder
You can use your recorder as the source player or the recording
deck. You can use a camcorder as the source player and your
recorder as the recording deck. Refer also to the other
components’ instruction manuals for connection and its
operations.
A
Make connections
Connection with another video recorder
Connection with a camcorder
Connect the camcorder’s AUDIO/VIDEO OUT connectors to the
recorder’s L-1 IN/OUT or L-2 IN/DECODER connector via a cable
adapter.
B
Load cassettes
Insert the playback cassette into the source player and the cassette
to be recorded on into the recording deck.
C
Select input mode on recording deck
Select the correct external input on the recording deck. On this
recorder, press
AUX
or
PR
r
/
t
on the remote control or
PR+/–
on
the recorder.
Select “L-1” for the L-1 IN/OUT connector, or “L-2” for the L-2 IN/
DECODER connector.
D
Select edit mode
Select the appropriate edit mode for the components if such a
mode is equipped.
● On this recorder, set “PICTURE CONTROL” to “EDIT”. (
੬
12)
E
Start playback
Engage the Play mode of the source player.
F
Start recording
Engage the Record mode of the recording deck.
NOTE:
When you select a country in Central or Eastern Europe for
country setting, you cannot use decoder with this recorder.
Connecting to a satellite receiver
Connect the decoder to the satellite receiver’s connector if you
have a decoder, L-1 IN/OUT connector to TV’s connector, and
L-2 IN/DECODER connector to the satellite receiver’s connector.
Then connect the satellite receiver and TV.
● Set “L-2 SELECT” to “A/V”. (
੬
12)
● To record a programme via the satellite receiver, set the input
mode to “L-2” by pressing AUX or PR r/t on the remote
control or PR+/– on the recorder.
● To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
● For details, refer to the instruction manual for the satellite
receiver and decoder.
Connecting/Using a decoder
You can enjoy the variety of programming that is available through
scrambled channels.
A Set “L-2 SELECT” to “DECODER”. (
੬
12)
B Connect the recorder’s L-2 IN/DECODER connector to the
decoder’s 21-pin SCART connector using a 21-pin SCART cable.
C Perform the procedure as described in “When receiving a
scrambled broadcast” (
੬
14).
Connecting/Using a stereo system
You can listen to the soundtrack through your stereo system.
Connect the AUDIO OUT L and R connectors on the recorder to
the AUX IN or TAPE MONITOR connectors on your stereo
system’s receiver or amplifier.
● When listening to sound through the connected stereo system,
turn the TV’s volume down completely.
Mode Set
You can change various mode settings.
A
Access Main Menu screen, then Mode Set screen
Press MENU. Press rt to place the
pointer next to “MODE SET”, then press
OK or e.
B
Select mode
Press rt to place the pointer next to the
item you want to set.
C
Change setting
Press OK or e. The default setting is bold in the following table.
Press MENU to return to normal screen.
Editing
Your recorder
Another recorder
L-2 IN/DECODER or
L-1 IN/OUT
To L1 IN/OUT
When using your
recorder as the
recording deck,
connect its L-2 IN/
DECODER or L-1 IN/
OUT connector to the
source player.
When using your
recorder as the source
player, connect its L-1
IN/OUT connector to
the recording deck.
21-pin
SCART cable
(not
provided)
System Connections
Subsidiary Settings
Turn on the recorder and the TV, and set your TV to its AV mode
or video channel.
HR-V600_001EN.fm Page 11 Friday, January 24, 2003 11:21 AM