JVC HR-DD848E VCR User Manual


 
32 EN
12
45
3
6
8
0
7
9
2
4
1
3
OK
CANCEL
START+/–
DATE+/–
STOP+/–
Auto Timer
When the Auto Timer is set to ON the timer is automatically
engaged when the recorder power is turned off and automati-
cally disengaged when the recorder is powered back on.
ACCESS MAIN MENU
SCREEN
1
Press MENU twice.
ACCESS MODE SET
SCREEN
2
Press PUSH JOG %fi to
move the highlight bar
(pointer) to "MODE SET",
then press OK.
SELECT MODE
3
Press PUSH JOG to select
either "ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
For safety, when Auto timer is set to "OFF", all other recorder
functions are disabled while the Timer mode is engaged. To
disengage the timer, press TIMER.
%
MENU
5
MODE SET
AUTO TIMER :OFF
O. S. D. :ON
B. E. S. T. : ON
AV2 SELECT :AV2
TIME SCAN : ON
AUDIO
[5
] = [ ] : ON/OFF
[MENU] : EXIT
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
GUIDE PROG SET
CLOCK SET
[5
] =
[MENU] : EXIT
TIMER RECORDING (cont.)
TIMER
PUSH JOG
Check And Cancel
Programmes
ACCESS PROGRAMME
DISPLAY AND/OR SCREEN
1
Press PROG CHECK.
The display panel shows the programme start time.
Pressing OK changes the display to the programme
stop time, then the date and channel position.
If the recorder is turned on and the TV is set to its
VIDEO channel or AV mode, you can check program
information on screen as well.
Each time you press PROG CHECK, the next
programme's information appears.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CANCEL.
All information you input is deleted.
REVISE PROGRAMME
INFORMATION
2
Input the appropriate data using the START +/–, STOP
+/–, DATE +/– and TV PROG +/– buttons on the
remote control.
TV PROG+/–
PROG CHECK