Filter
Top Products
EN 47
Turn on the TV and select the VIDEO channel (or AV mode).
CLOCK SET
12
45
3
6
8
0
7
9
2
4
1
3
PUSH JOG
OK
IMPORTANT
Perform the following steps only if auto clock set has not
been set correctly by Auto Set Up function (੬ pg. 4) or
Auto Channel Set (੬ pg. 42) or if the recorder's memory
backup has expired.
MENU
If you performed Auto Set Up or Auto Channel Set without ever
having set the clock previously, the recorder’s built-in clock is
also set automatically. The Auto and Manual clock setting
procedures are necessary when . . .
– a power outage of more than 60 minutes occurs.
– the tuner has been set manually.
– the user desires to set the clock slightly ahead of the actual
time.
– the clock was not set even after Auto Set Up or Auto
Channel Set was performed.
Whether you perform Auto or Manual clock setting, you can
use the convenient Just Clock function.
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option appears in the Clock Set and Auto
Clock screens, and can be set “ON” or “OFF” (the default
setting is “OFF”). Press OK until the Just Clock setting
begins blinking, then press PUSH JOG%fi to change the
setting.
IMPORTANT: If you turn off Just Clock, the accuracy of
your recorder’s built-in clock may be reduced, which could
adversely effect timer recording. We recommend you to
keep Just Clock on. In cases where the clock setting data
from a PDC signal is incorrect, however, you are advised to
keep Just Clock set to "OFF".
* Just Clock does not work in areas where no TV station
transmits PDC signals.
Both Auto and Manual clock setting procedures begin from step 4.
TURN THE RECORDER ON
1
Press .
ACCESS MAIN MENU SCREEN
2
Press MENU twice.
ACCESS CLOCK SET SCREEN
3
Move the highlight bar (pointer) to "CLOCK SET" by
pressing PUSH JOG %fi, then press OK. The Clock Set
screen appears.
Preparation
CONTINUED ON NEXT PAGE.
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
GUIDE PROG SET
CLOCK SET
[5
∞
] =
[MENU] : EXIT
CLOCK SET
TIME DATE YEAR
0: 00 01 . 01 00
JUST CLOCK : OFF
TV PR. : 1
[ ] : AUTO CLOCK
[
5
∞] =
[MENU] : EXIT
5