Filter
Top Products
EN 25
You can use a camcorder or another video recorder as the
source player and your video recorder as the recording deck.
Edit From A
Camcorder Or
Another Video
Recorder
MAKE CONNECTIONS
1
Connect the AUDIO/VIDEO OUT connectors on the
camcorder or another video recorder to the front panel
AUDIO/VIDEO input connectors on the recording deck.
SET RECORDER'S INPUT
MODE
2
Press NUMBER key "0" and/or TV PROG so that "F-1"
appears on the display panel.
SELECT "EDIT" FOR PICTURE
CONTROL SET MODE
3
Follow the "Picture Control" section on page 15, then
select "EDIT."
NOTE:
When you select "EDIT" to dub tapes, be sure to select
"AUTO" (or "NORM" when the B.E.S.T. function is set to
"OFF") after you finish dubbing the tapes.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
Recording deck Your recorder
IMPORTANT:
● To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
● PAL, SECAM and NTSC camcorders or video recorders
can be used as a player for editing.
● For more information on multi-system compatibility,
੬ pg. 26.
AV Cable (not provided)
VIDEO OUT
AUDIO OUT
VIDEO IN AUDIO IN
12 3
4
0
6
78
5
9
4
3
2
NUMBER "0"
Camcorder
Source player
Another video recorder
or
Source player
TV PROG