JVC HR-J271MS VCR User Manual


 
6 EN
123
456
7
89
0
1
2
4
3
INITIAL SETTINGS (cont.)
Auto Set Up
Before starting, make sure of the following:
The TV aerial cable should be connected to the recorder.
The recorder's mains power cord should be connected to
a mains outlet. pg. 3
The "Video Channel Set" procedure should be done first
and the TV should be set to its AV mode (With AV
connection pg. 5) or video channel (With RF
connection pg. 4).
The Auto Set Up function simplifies installation by guiding you
through the procedures of setting the language, clock and tuner
channels — simply follow the on-screen menus that appear.
IMPORTANT
Don't press any buttons on the recorder or remote that
are not directly related to the step you are performing
while Auto Set Up is in progress.
If you perform Auto Set Up successfully during installa-
tion, there's no need to separately perform the Language
Select, Clock Set or Channel Set procedures, but if
adjustments become necessary they can be performed as
follows:
To change the selected language pg. 9
To reset or adjust the time pg. 10
To add/delete channels manually pg. 35
To reset the tuner after moving to a different location
pg. 34
SELECT LANGUAGE
1
Press PUSH JOG %fi to place the pointer next to your
desired language (English, Arabic or Russian), then
press OK or PUSH JOG .
The Clock Set screen appears.
SET TIME
2
Press PUSH JOG %fi to
set the time, then press OK
or PUSH JOG .
Press and hold either
button to delay or
advance the time by 30
minutes.
SET DATE
3
Press PUSH JOG %fi to set the date, then press OK or
PUSH JOG .
Press and hold either button to change the date by 15
days.
SET YEAR
4
Press PUSH JOG %fi to set the year, then press MENU.
CLOCK SET
TIME DATE YEAR
0:00 01.01 00
[
5
/
] =
[MENU] : EXIT
PUSH JOG
MENU
OK