Filter
Top Products
Filename [HRJ278EU2.fm]
Masterpage:Left
24
EN
EDITING
Edit From A
Camcorder
You can use a camcorder as the source player and your
recorder as the recorder.
A
Make connections.
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s L-1 IN/OUT connector via a
cable adapter.
B
Set the recorder’s input mode.
Press
AUX
(
NUMBER
key “
0
”) and/or
PR
on the remote
control to select “L-1”. You can select the input mode
also by pressing
9
[PR]
, and then
5
[PR+]
or
3
[PR–]
on the recorder. See step
2
in “Basic Recording”
(
੬
pg. 16).
C
Set the edit mode.
See “PICTURE CONTROL” on page 27.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
When you select “EDIT” to dub tapes in step
3
, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
Your recorder
Audio/Video
cable
(not provided)
VIDEO OUT
AUDIO OUT
Camcorder
Cable adapter
(not provided)
Player
HRJ278EU2.fm Page 24 Monday, March 12, 2001 10:28 AM