Filter
Top Products
Filename [HRJ278EU3.fm]
Masterpage:Right
EN
33
Swap Channel Positions
Example: To swap PR 03 and PR 09.
A
Access the Main Menu screen.
Press
MENU
.
B
Access the Confirmation screen.
Press
rt
to move the highlight bar (pointer) to
“MANUAL CH SET”, then press
OK
or
e
. The
Confirmation screen appears.
C
Select the position. (e.g. 03)
D
Select the position. (e.g. 09)
● To cancel the channel swapping, press w
.
● Repeat steps
3
and
4
as necessary.
E
Close the Confirmation screen.
Press
MENU
.
Fine-Tuning Channels Already Stored
A
Access the Main Menu screen.
Press
MENU
.
B
Access the Confirmation screen.
Press
rt
to move the highlight bar (pointer) to
“MANUAL CH SET”, then press
OK
or
e
. The
Confirmation screen appears.
C
Select the channel to fine-tune.
D
Perform tuning.
E
Close the Confirmation screen.
Press
MENU
.
Press
rt
until the section of
PR “03” begins blinking,
then press
OK
or
e
.
● Only “03” will blink.
Press
NUMBER
keys to input
“0” and “9”. The two
selected channels will be
swapped.
Press
rt
until the channel
you want to tune begins
blinking, then press
OK
or
e
twice
.
Press
rt
until the picture is
its clearest. Then press
OK
.
● Repeat steps
3
–
4
as
necessary.
HRJ278EU3.fm Page 33 Wednesday, March 14, 2001 3:11 PM