Filter
Top Products
34
ACCESS MAIN MENU
SCREEN
1
Press MENU as many times as necessary.
ACCESS FUNCTION SET
SCREEN
2
Place the arrow next to "FUNCTION SET" by pressing
CH
5
∞
, then press OK.
ACCESS AUTO TIMER
SCREEN
3
Place the arrow next to "AUTO TIMER" by pressing
CH
5
∞
, then press OK. Now skip to step 2 of the
procedure below.
Or, during on-screen timer programming ...
ACCESS AUTO TIMER
SCREEN
1
In step 7 in the G-Code Timer Programming procedure
(੬ pg. 29) or in step 7 in the On-Screen Timer Program-
ming procedure (੬ pg. 31), press MENU.
SELECT MODE
2
Place the arrow next to
your choice ("ON" or
"OFF") by pressing CH
5
∞
.
RETURN TO NORMAL
SCREEN
3
Press MENU as many times as necessary.
NOTE:
For safety, when AUTO TIMER is set to “OFF”, all other VCR
functions are disabled while the Timer mode is engaged. To
disengage the timer, press TIMER.
Auto Timer
When the Auto Timer is set to ON the timer is automatically
engaged when the VCR's power is turned off and automatically
disengaged when the VCR is powered back on.
AUTO TIMER
=ON
OFF
PRESS (
5
,∞) TO SELECT
PRESS (MENU) TO END
TIMER RECORDING (cont.)
123
456
789
0
123
456
789
0
6
q
MENU
CH
CH
TIMER
OK
OK
MENU