JVC HR-J635EA VCR User Manual


 
EN 15
TV signals being received by the recorder’s built-in tuner can be
recorded onto a video tape. You can “capture” a TV programme
using your video recorder.
RECORDING
Basic
Recording
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
Select the appropriate colour system by pressing the
COLOUR SYSTEM button.( pg. 32)
CHOOSE A PROGRAMME
2
Press TV PROG. 5/ or the NUMBER keys to select
the channel you wish to record.
The TV PROG. dial can also be used to select a channel.
SET TAPE SPEED
3
Press SP/LP/EP. Check the SP/LP* indicator on the
recorder display panel to confirm the selected tape
speed.
* EP is displayed on screen only.
START RECORDING
4
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
NOTE:
Hi-Fi audio recording in NTSC EP mode is not possible.
B.E.S.T. takes place at the beginning of each first
SP and first LP (or EP) recording after inserting the
cassette ( pg. 18).
Turn on the TV and select the VIDEO channel (or AV mode).
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
6
q
12
45
3
6
8
0
7
9
PLAY
COLOUR SYSTEM
RECORD
STOP/EJECT
NUMBER
TV PROG.
SP/LP/EP
PLAY
RECORD
PAUSE
STOP
TV PROG.
PAUSE