JVC HR-J635EA VCR User Manual


 
22 EN
G-Code Timer
Programming
Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder will
come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
Select the appropriate colour system by pressing the
COLOUR SYSTEM button. ( pg. 32)
TIMER RECORDING (cont.)
Before performing G-Code timer recording, be sure to read
"G-Code Setup" ( pg. 20).
6
q
12
45
3
6
8
0
7
9
TIMER
OK
SP/LP/EP
CANCEL
DAILY
PROG.
NUMBER
ADD
WEEKLY
COLOUR SYSTEM
To Delay The Stop Time . . .
. . . press ADD after pressing OK in step 3. Each time you press,
the Stop time is delayed by 5 minutes (meaning that 5 minutes
of recording time is added). You can easily compensate for
anticipated programme schedule delays this way.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday–Friday).
G – CODE
[0–9] =
[PROG./CLOCK] :MENU
ACCESS G-CODE SCREEN
1
Press PROG.
ENTER G-CODE NUMBER
2
Press the appropriate
NUMBER keys to enter the
G-Code number.
If you made a mistake,
press CANCEL and enter
the correct G-Code
number.
CHECK INPUT DATA
3
Press OK on the remote
control. The G-Code
Programming screen
appears.
If the G-Code number
you entered is incorrect,
"ERROR" will be
displayed on the screen.
Press CANCEL and enter
the correct G-Code number.
SET TAPE SPEED
4
Press SP/LP/EP.
RETURN TO NORMAL
SCREEN
5
Press OK.
Repeat steps 15 for each additional programmes.
ENGAGE TIMER MODE
6
Press TIMER.
– P 1 –
G–CODE 12345678
START STOP
21:00 = 22:00
WEEKLY SP
DATE TV PROG.
25. 12 29
:OK
G – CODE
12345678
[0–9] =