JVC HR-J693U VCR User Manual


 
Page 7 January 15, 2004 10:38 am
7
E
Set VCR channel
The VCR channel is the channel on which you can watch the picture
from the VCR on the TV when only using the RF connection. To reset
the VCR channel, perform the following steps:
A Press POWER to turn off the VCR, then press STOP/EJECT
(
0
) on the VCR for more than 5 seconds. CH3 appears
on the display panel.
B Press
CH
r
/
t
on the Remote to select CH3, CH4 or CH–”
(OFF), then press
OK
.
The VCR channel is preset to CH3. Set to CH4 if CH3 is
used for broadcasting in your area.
F
Final preparation for use
Turn on the TV. Select the VCR channel 3 or 4 (or AV mode) on
the TV. You can now perform basic playback or basic recording.
If you connect the TV and the VCR only using the RF
connection (
pg. 6), press TV/VCR on the Remote so that the
VCR mode indicator lights on the display panel.
Initial Settings
Language Setting
The default setting is ENGLISH.
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press
rt
to
move the highlight bar (arrow) to INITIAL
SET, then press OK or
e
.
B
Select language
This VCR offers you the language choice to
view menus and some messages in
English, Spanish or French. Press
rt
to
move the highlight bar (arrow) to
LANGUAGE, then press OK or
e
repeatedly until the desired language is
selected.
Press MENU to return to normal screen.
Clock Setting
Perform clock setting only if the clock has not been set correctly
by the Plug&Play setting or if you use a cable box.
Preparations
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press
rt
to
move the highlight bar (arrow) to INITIAL
SET, then press OK or
e
.
B
Access Clock Set screen
Press
rt
to move the highlight bar (arrow)
to CLOCK SET, then press OK or
e
.
The VCR channel will be reset to CH3 after a power failure
occurs.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Language selection will be reset to English after a power
failure occurs.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
Connections and Plug&Play Setting
CONTINUED ON NEXT PAGE
HR-J693U_EN-new.fm Page 7 Thursday, January 15, 2004 10:38 AM