JVC HR-J693U VCR User Manual


 
Page 9 January 15, 2004 10:38 am
9
Setting channels manually
Manual Channel Set
You can add the channels you want or delete the channels you do
not want manually.
A
Access Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press
rt
to
move the highlight bar (arrow) to TUNER
SET, then press OK or
e
.
B
Access Manual Channel Set screen
Press
rt
to move the highlight bar
(arrow) to MANUAL CHANNEL SET,
then press OK or
e
.
C
Add or skip desired channels
To add channels
A Press the Number keys on the Remote
to input a channel number you want to
add.
B Press OK or
e
to set to ADD.
C Repeat A to B to add other channels.
Press MENU to return to normal screen.
To skip channels
A Press
rt
or the Number keys to select a channel number you
want to skip.
B Press OK or
e
to set to SKIP.
C Repeat A and B to skip other channels. Press MENU to return
to normal screen.
Playback
Basic Playback
A
Load a cassette
Make sure the window side is up, the rear label side is facing you
and the arrow on the front of the cassette is pointing towards the
VCR.
Do not apply too much pressure when inserting.
The VCR turns on, and the counter on the on-screen display is
reset, automatically.
If the cassettes record safety tab has been removed, playback
begins automatically.
B
Start playback
Press PLAY (
4
).
After a power failure occurs, band selection will be reset to
CATV.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
MANUAL CHANNEL SET
(CATV)
CH 45 ADD
PRESS NUMBER KEY (09)
OR ( , ), THEN (OK)
PRESS (MENU) TO END
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
During playback
Stop playback
Press STOP (
8
) on the
Remote.
OR Press STOP/EJECT (
0
) on
the VCR.
Pause playback and view still picture
Press PAUSE (
9
).
Press PLAY (
4
) to resume normal playback.
NOTE:
During still picture, vertical vibration may appear on the TV
screen. Use CH
r
/
t
on the Remote to get a clearer picture.
Pause and Frame-by-Frame playback
Press PAUSE (
9
) to pause, then press
6
(or PAUSE (
9
))
repeatedly.
Press PLAY (
4
) to resume normal playback.
High-Speed Picture Search
Press REW (
3
) or FF (
5
).
Press PLAY (
4
) to resume normal playback
If you press and hold REW (
3
) or FF (
5
) for more than 2
seconds, simply releasing it cancels the picture search, and
normal playback resumes.
Variable-Speed Picture Search (including slow-motion)
Press
2
or
6
repeatedly.
Press PLAY (
4
) to resume normal playback.
Each time you press
2
or
6
, the playback speed
changes. To decrease the speed during picture search, press the
opposite direction button repeatedly.
During still picture, press and hold
6
to start forward slow
motion playback (or
2
to start reverse slow motion
playback). When you release the button, still picture resumes.
During still picture, holding PAUSE (
9
) for more than
2 seconds also starts forward slow motion playback. If you
press PAUSE (
9
) again, still picture resumes.
NOTE:
During slow motion picture, some noise might appear on the TV
screen. Press CH
r
/
t
on the Remote to eliminate the noise.
REC PAUSE PLAY STOP/EJECT
Initial Settings
CONTINUED ON NEXT PAGE
HR-J693U_EN-new.fm Page 9 Thursday, January 15, 2004 10:38 AM