Filter
Top Products
advanced features32
T-V Link Functions
When you connect the VCR and your TV via both the RF cable and the fully-
wired 21-pin SCART cable (੬ pg. 9), the following functions are available.
You can use these functions only with a TV offering T-V Link, etc.*
For details, refer to the instruction manual for your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK,
Q-Link, DATA LOGIC or NexTView Link via fully-wired 21-pin SCART cable. The
degree of compatibility and available functions may differ by system.
NexTView Link
You can download the EPG (Electronic Programme Guide) information from
your TV for timer-programming on the VCR.
For details, refer to the instruction manual for your TV.
TV Auto Power On
You can turn on the TV and set it to video mode automatically whenever you
play a tape.
For details, refer to the instruction manual for your TV.
VCR Auto Standby
You can use your TV’s Remote Control to turn off the VCR.
For details, refer to the instruction manual for your TV.
HR-J695/696EK-EN/p27-40 5/28/02, 11:06 AM32