Filter
Top Products
advanced features 39
TV Set
Video Channel
or AV Mode
Another VCR
Your VCR
21-pin SCART Cables
(not provided)
Your VCR as the Player
Your VCR as the Recorder
RF Cable
(provided)
Your VCR
Another VCR
TV Set
Video Channel
or AV Mode
RF Cable
(provided)
21-pin SCART Cables
(not provided)
Editing Using Another VCR
connect up Connect the two VCRs together using a 21-pin SCART cable. If
this VCR is to be the player, connect its
L-1 IN/OUT connecter to the recording
VCR. If this VCR is to be the recorder, you can use either the
L-1 IN/OUT or the
L-2 IN/DECODER connecter to connect to the player VCR.
set recorder input mode The recording VCR mode must be set to AUX. If
this VCR is the recorder, press
AUX and /or PR to select L-1 (if you’ve used the L-1
IN/OUT
connecter) or L-2 (if you’ve used the L-2 IN/DECODER connecter). If this
VCR is the player, set
O.S.D. to OFF. (੬ pg.41)
set edit mode See Picture Control on page28.
start source vcr Engage its PLAY mode.
start recording vcr Engage its RECORD mode.
Editing
HR-J695/696EK-EN/p27-40 5/28/02, 11:06 AM39