Filter
Top Products
advanced features 53
Guide Program Numbers
Guide Program Numbers are used by the VIDEO Plus+ system to identify the correct preset
to record. You should only need to perform this function if:
• using a PlusCode number does not identify a preset number automatically
• you add a channel after Auto Setup or Preset Download has been performed
• you wish to use the VIDEO Plus+ system to record a satellite programme
Manually Setting Guide Program Numbers
get to the guide prog set screen Press m. Move the highlight bar to INITIAL SET using
the A and B buttons and press
O
K
3
/
(or E). Move the highlight bar to GUIDE PROG
SET
using the A and B buttons and press
OK
3
/
(or E).
enter guide prog number Use the A and B buttons to enter the correct Guide
Program number for the TV station shown then press
OK
3
/
(or E).
enter receiving preset number Press AUX (number key
‘0’) to select
TV PROG or SAT. Use the A and B buttons
to enter the receiving preset number that the VCR or satellite
receiver uses to receive the TV station then press
O
K
3
/
(or E).
satellite receiver users To timer-record a satellite
programme with the VIDEO Plus+ system, you need to install
the provided Satellite Controller and performs the procedure
described in
Satellite Receiver Control Setting (੬ pg. 34).
return to normal screen Press m.
[1] a k [0]: SAT
[MENU]: EXIT
GUIDE PROG SET
GUIDE PROG TV PROG
CH4
F
44
HR-J695/696EK-EN/p52-59 5/28/02, 11:09 AM53