Filter
Top Products
37
Cable Box Multi-Brand
Remote Control
The VCR's remote control can control functions on the brands
of cable boxes listed below. Some cable box brands have more
than one code. If your cable box does not function with a
specified code, try other codes.
12
45
3
6
8
0
7
9
POWER
STOP
TURN ON THE CABLE BOX
1
Turn the power on using the cable box’s remote control.
SET REMOTE CONTROL
MODE
2
Set the TV/CABLE/VCR switch on the VCR’s remote
control to CABLE.
ENTER CABLE BOX BRAND
3
While holding down POWER on the VCR's remote
control, use the NUMBER keys to enter the cable box
brand number from the chart at bottom left and then
press STOP.
Follow the example shown below.
● Once you have set the remote control to operate the
cable box, you don't have to repeat this step until you
replace the remote control's batteries.
OPERATE CABLE BOX
4
First, press POWER to see if the cable box’s power goes
off as it should. If it does, try other functions (CH
5
∞
and the NUMBER keys can be used to operate the
cable box).
● For some brands of cable box, you must press ENTER
after having pressed the NUMBER keys.
● To return the remote to VCR control, set the TV/
CABLE/VCR switch to VCR.
NOTES:
●
Depending on the kind of cable box, there may be cases
where some or all functions cannot be operated using the
remote control.
●
It's not possible to set the remote control for both your cable
box and your satellite receiver at the same time; you can only
set the remote control to the brand of either one.
●
You have to subscribe to a cable service to receive cable
channels.
(Ex.) To set remote control to TOCOM 01:
Hold
down
Release
1
STOP
POWER
0
Press in succession
CABLE BOX BRAND NAME BRAND CODE
CURTIS 08, 09
GEMINI 17
GENERAL INSTRUMENTS 10, 11, 12, 13, 14, 15, 16, 17
JERROLD 10, 11, 12, 13, 14, 15, 16, 17
PANASONIC 03, 04, 05
RCA 03, 04, 05
SAMSUNG 17, 18
SCIENTIFIC ATLANTA 08, 09
SL MARX 17, 18
SPRUCER 03, 04, 05
TELEVIEW 17, 18
TOCOM 01, 02
VIDEOWAY 06, 07
ZENITH 06, 07
CH
NUMBER
ENTER
TV/CABLE/VCR