Filter
Top Products
28
Symptoms
Sound noise is heard during NICAM signal receiving.
(There is no NICAM tuner in this VCR.)
Whistling or howling is heard from TV during camera
recording.
Channel cannot be switched.
Remote control does not function.
Index Search does not function properly.
Check point
L Press the Pause/Still
88
88
8 button more than two seconds
in accordance with step 5 of FINE TUNING.
(੬ p.10 Fine-tuning channels already stored.)
– NICAM SUPPRESSION function works after “*”
indication.
– Press the STORE button.
L Move camcorder or camera’s microphone away from TV or reduce TV
sound volume.
L Is recording in progress?
– Press the Pause/Still
88
88
8 button, change the channel, and press the
Play
--
--
- button.
L Are the batteries discharged?
– Replace with new ones.
L Adjacent index codes may be too close to each other.
– Erase some index codes and mark new ones if necessary, with
sufficient distance between any two index codes.
OTHERS
Troubleshooting (cont’d)
Specifications
GENERAL
Power requirement............. AC110 – 240~, 50/60 Hz
Power consumption ........... 24 W
Temperature
Operating ......................... 5°C to 40°C
Storage ............................ –20°C to 60°C
Dimensions (W × H × D) .... 435 × 105 × 351 (mm)
Weight ................................ 4.9 kg
Format................................ VHS standard
Maximum recording time
SP .................................... 240 min. with E-240 video cassette
(PAL/MESECAM)
160 min. with T-160 video cassette
(NTSC)
LP .................................... 480 min. with E-240 video cassette
(PAL/MESECAM)
EP .................................... 480 min. with T-160 video cassette
(NTSC)
VIDEO
Signal system..................... PAL-type colour signal and CCIR
monochrome signal,
625 lines/50 field
NTSC colour and EIA monochrome
signals, 525 lines/60 fields
Recording/Playback
system................................ DA-4 (Double Azimoth) head
herical scan system
Signal-to-noise ratio ........... 43 dB
Horizontal resolution .......... 240 lines (PAL/MESECAM)
220 lines (NTSC)
Input ................................... 0.5 – 2.0 Vp-p
Output ................................ 1.0 Vp-p
AUDIO
Frequency range ................ 70 Hz to 10,000 Hz (Normal)
20 Hz to 20,000 Hz (Hi-Fi)
Input ................................... –8 dBs
Output ................................ –6 dBs
MIC Input ........................... –56 dBs
TUNER/TIMER
TV channel storage
capacity .............................. 48 positions (+ AUX position “AU”)
Channel coverage .............. VHF Low 42 – 153 MHz
CH 1 – 5 (China, Russia)
High 153 – 300 MHz
CH 6 – 12 (China, Russia)
HYPER 300 – 470 MHz
UHF 470 – 870 MHz
CH 13 – 57 (China, Russia)
CH 21 – 69 (U.K.)
Aerial output ....................... UHF channels 24 – 27/
(E32 – E40) (adjustable)
Programme capacity .......... 1-year/8-programme timer
Memory backup time.......... 18 hours
ACCESSORIES
Provided accessories
Aerial cable .........................................................................1
Infrared remote control unit.................................................1
“AA/UM-3” battery ...............................................................4
“AAA/UM-4” battery ............................................................2
Conversion plug ..................................................................1
Wireless microphone ..........................................................1
Wired/Wireless microphone ................................................1
• Specifications shown are for SP mode unless otherwise
specified.
• Design and specifications subject to change without notice.
TV PROG. 1
[STORE] : STORE
[TV PROG ] : FINE TUNING+
[TV PROG ] : FINE TUNING
-
[CH SET] : EXIT
*