Filter
Top Products
16 EN
TV signals being received by the recorder’s built-in tuner can be
recorded onto a video tape. You can “capture” a TV programme
using your video recorder.
RECORDING
Basic
Recording
● Turn on the TV and select the VIDEO channel (or AV
mode).
● Press VCR on the remote control to select the VCR mode.
q
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The counter is reset to 0:00:00 and the recorder
power comes on automatically.
● Select the appropriate colour system by pressing the
COLOUR SYSTEM button.(੬ pg. 30)
CHOOSE A PROGRAMME
2
Press TV PROG +/– or the NUMBER keys to select the
channel you wish to record.
● The TV PROG dial can also be used to select a channel.
SET TAPE SPEED
3
Press (SP/LP/EP). Check the SP/LP/EP indicator on
the recorder display panel to confirm the selected tape
speed.
START RECORDING
4
Press and hold RECORD and press PLAY on the remote
control, or press RECORD on the recorder.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
Recording Resume Function
If there is a power outage during recording (or Instant Timer
Recording or timer recording), the recording will resume
automatically when power is restored to the recorder unless the
recorder's memory backup has expired.
TV PROG
COLOUR SYSTEM
RECORD
PLAY
STOP/EJECT
PAUSE
SP/LP/EP
● To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Accidental erasure prevention
Record safety tab
¶
1
4¢
7
3
8
¡
123
456
7
8
0
9
2
1
3
NUMBER
PLAY
PAUSE
STOP
RECORD
TV PROG
SP/LP/EP
VCR
TV PROG
B.E.S.T. takes place at the beginning of both the
first SP and the first LP (or EP) recording after
inserting the cassette (੬ pg. 18).