Filter
Top Products
EN 27
Your remote control can operate the basic functions of your TV
set. In addition to JVC TVs, other manufacturer’s TVs can also
be controlled by setting the appropriate switch on the remote
control.
Before you start, turn on the TV using its remote control.
NOTE:
If your TV is a JVC, you don’t have to set the code in step 1. Go
to step 2.
Multi-Brand
Remote
Control
REMOTE CONTROL
¶
1
4¢
7
3
8
¡
123
456
7
8
0
9
2
1
3
TV BRAND NAME CODE
JVC 01
PANASONIC 02
SONY 03
SHARP 04
TOSHIBA 05
MITSUBISHI 06
HITACHI 07
SANYO 08
FUNAI 09
AIWA 10
DAEWOO 11
SAMSUNG 12, 16
GOLDSTAR 13
THOMSON 14
FERGUSON 15
PHILIPS 16
GRUNDIG 17
ITT 18
MIVER 19
FINLUX 20
NOKIA 21
NEC 22
NUMBER
TV/VCR
OK
TV VOL
PUSH JOG
TV PROG+/–
STOP
TV
SET TV BRAND CODE
1
Refer to the chart below. While holding down TV, enter
your TV’s brand code using the NUMBER keys, then
press STOP.
● You don’t have to repeat this step until you replace
your remote control’s batteries.
TRY OPERATING TV
2
Press on the remote to turn the TV off. If it goes off,
try other operations.
● The button, TV/VCR button, TV PROG
+/–
button, TV VOL +/– (or %/fi) button and
(MUTE) button on the remote can all be used to
operate the TV.
● To operate the TV, press TV to set the remote control
to the TV mode.
● To return the remote to video recorder control, press
VCR to set the remote control back to the VCR mode.
IMPORTANT
Although the provided remote control unit is compatible with
JVC televisions, as well as many other models, it may not work
with your TV, or in some instances, may have limited function
capability.
Control Your TV Using Addi-
tional Buttons
The NUMBER keys on the remote can also be used to select
the TV’s channel by setting the remote control to the TV mode.
1Press TV to set the remote control to the TV mode.
2Use the NUMBER keys, and the DIGIT ENTRY ( )
button, the PUSH JOG button or the OK button to select
the TV’s channel.
● With televisions under Code 01, 02, 03, 05, 07, 15, 16 or
22, the DIGIT ENTRY button corresponds to the 1-digit/2-
digit entry switching button (often labelled – /– –) of your
TV’s remote control.
● With televisions under Code 01, 06, 08, 18 or 19, the
PUSH JOG button corresponds to the 10 + button, and
the PUSH JOG button corresponds to the 20 + button
of your TV’s remote control.
● With televisions using Code 03, the OK button corre-
sponds to the ENTER button of your TV’s remote control.
NOTE:
The way these buttons are used is determined by your TV.
Use these buttons as instructed for your TV’s remote
control.
%
%