Filter
Top Products
EN 17
Repeat Playback
Your video recorder can automatically play back the whole tape
100 times repeatedly.
START PLAYBACK
1
Press PLAY.
ACTIVATE REPEAT
PLAYBACK
2
Press PLAY and hold for over 5 seconds, then release.
● The Play indicator ( ) on the display panel blinks
slowly.
● The tape plays 100 times automatically, and then
stops.
STOP PLAYBACK
3
Press STOP at any time to stop playback.
NOTES:
●
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
●
Repeat Playback is not possible with a PAL tape recorded in
EP mode.
Video Stabilizer
You can automatically correct vertical vibrations in the picture
when playing back unstable recordings made on another
recorder.
* The default setting is "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Press PUSH JOG %fi to
place the pointer next to
"FUNCTION SET", then
press OK or PUSH JOG
#
.
SELECT VIDEO STABILIZER
SET MODE
3
Press PUSH JOG %fi to
place the pointer next to
"VIDEO STABILIZER", then
press OK or PUSH JOG
#
to select "ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
●
When you finish viewing a tape, be sure to set this function to
"OFF".
●
Regardless of the setting, this function has no effect during
recording and during special effects playback.
●
The on-screen display may jitter vertically when this function
is set to "ON".
●
To watch recordings with close-caption, set this function to
"OFF".
PREVIOUS PAGE
PROG. NAVIGATION ON
AUTO SP=LP TIMER OFF
VIDEO STABILIZER ON
S-VHS ON
S-VHS ET OFF
[
5
/
∞
] =
[MENU] : EXIT
MAIN MENU
PROGRAMME NAVIGATION
FUNCTION SET
TUNER SET
INITIAL SET
[
5
/
∞
] =
[MENU] : EXIT