JVC HR-S5980AH VCR User Manual


 
June 6, 2003 4:31 pm Page 12
—12—
Master Page: Right
24H Express Timer Programming
You can programme a timer recording that starts within 24 hours.
A
Access 24HR Express Timer Programme display
Push 24H EXPRESS #. “ ” and start time start blinking on the
display panel.
B
Set programme start time
Turn the JOG dial to the left or right. Then, push the JOG dial.
” and start time start blinking on the display panel.
One click stop of the JOG dial changes the time in 5-minute
intervals.
C
Set programme stop time
Turn the JOG dial to the left or right. Then, push the JOG dial and
channel number will start blinking.
One click stop of the JOG dial changes the time in 5-minute
intervals.
D
Set channel position
Turn the JOG dial to the left or right. Then, push the JOG dial and
channel number will start blinking.
You can cancel the setting at any time by pressing and holding
the JOG dial for more than 3 seconds. Repeat from the step 2.
E
Engage recorder’s timer mode
Press 24H EXPRESS #.
The recorder turns off automatically and “#” appears on the
display panel.
NOTES:
If “Err” appears on the display panel, repeat the steps again.
When a menu screen is shown, you cannot use 24H Express
Timer programming function. Press MENU to return to normal
screen, and try again.
You can use 24H Express Timer programming function also
when the recorder is turned off.
For 24H Express Timer programming function, the program
overlap warning display does not appear even if some programs
overlap each other.
In case of a power failure after programming, the recorder’s
memory backup keeps your selections (if the lithium battery is
not exhausted).
Check, cancel and replace programmes
A
Disengage timer mode
Press #, then press 1.
B
Access Program Check screen
Press ".
C
Access Program screen
Press " again to check more
information. Each time you press ", the
next programme’s information appears.
D
Cancel or replace a programme
Press & to cancel a programme.
To replace a programme, press the appropriate button: START +/–,
STOP+/–, DATE+/–, PR +/–, DAILY, WEEKLY and/or p.
If you do not want to edit the programme title, skip steps
5
and
6
.
E
Access title edit screen
Press the number key “1”. The Title Edit
screen appears.
You can access the title edit screen only
when “PROG. NAVIGATION” is set to
“ON”. (
15)
F
Enter programme title
P
ress the number keys and PUSH JOG e
to enter characters, then press OK. For
details, refer to “Entering character” on
page 14.
G
Return to normal screen
Press " as many times as necessary. If there are still some
programmes remaining, go on to step 8.
H
Return to timer mode
Press #.
Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder will
come on automatically.
Select the appropriate colour system (
15).
Programme start time indicator
Programme start time indicator
Programme stop time indicator
[1] : TITLE
P1
[PROG] : EXIT
[Y/U] : CURSOR
[&] : DELETE
[0-9] : SELECT LETTERS
: OK
24.12 8:00 PR.3
P1
[PROG] : EXIT
[Y/U] : CURSOR
[&] : DELETE
[0-9] : SELECT LETTERS
: OK
24.12 W
HR-S5980AH.5980AJ_EN001B.fm Page 12 Friday, June 6, 2003 4:31 PM