JVC HR-S6855EK VCR User Manual


 
basic features28
24H Express Timer
Programming
You can programme a timer recording that starts within 24 hours using the
24HEXPRESS
c button and the Advanced JOG Dial on the VCR.
enter programme mode Press the 24H
EXPRESS
c button on the VCR. The
Programme Start Time indicator starts
blinking on the display panel.
set start time Turn the JOG Dial to the
right or left. One click stop of the
JOG Dial
changes the time in 5-minute intervals.
set stop time Push the center part of
the
JOG Dial. The Programme Stop Time
indicator starts blinking on the display
panel. Turn the
JOG Dial to the right or left.
set preset position Push the center
part of the
JOG Dial. Turn the JOG Dial to
the right or left.
engage timer mode Press the 24H EXPRESS c button on the VCR. The VCR
turns off automatically and
c is displayed on the display panel.
Before pressing the
24H EXPRESS c button to engage the timer mode, you
can cancel the setting at any time by pressing the center part of the
JOG Dial
for more than 3seconds or pressing x on the Remote Control. Repeat the
above steps from setting the start time.
To disengage the Timer Mode, press c or
24H EXPRESS c.
Notes
You can set this VCR to timer record up to eight programmes. If you try enter a
ninth,
FULL appears on the display panel.
If
Err appears on the display panel, repeat the above steps again.
When a menu screen is shown, you cannot use the 24H Express Timer Pro-
gramming function. Press
m to return to normal screen, and try again.
You can use the 24H Express Timer Programming function also when the VCR
is turned off.
For the 24H Express Timer Programming function, the programme overlap
warning display does not appear even if some programmes overlap each other.
before you start
Set the tape speed
Make sure that the
VCR’s clock is set
correctly
Insert a cassette with
the safety tab in place
SP
SP
SP
SP