JVC HR-S6855EK VCR User Manual


 
welcome to jvc 9
GETTING EVERYTHING READY (continued)
connect cables Connect the cables as indicated in the diagram (below), using
the TV Aerial Cable, the
RF Cable and the 21-pin SCART Cable (not provided).
scart and rf
SCART is a
recommended option
because its use
improves the quality of
the picture.
If connecting to a stereo
TV you will need a
SCART cable.
There are several types
of SCART cables, fully-
wired and others.
If you use a SCART
cable, you must also
connect the RF cable.
notes
The AV1 (L-1) IN/OUT
connector accepts and
delivers either a
composite signal
(regular video signal) or
a Y/C signal (a signal in
which the luminance
and chrominance signals
are separated). If your
TV’s 21-pin AV input
connector (SCART) is
compatible with the Y/C
signal, set L-1 OUTPUT
to S-VIDEO after the
connection and the
initial settings are
completed ( pg. 50).
You can obtain high-
quality S-VHS pictures.
(For connection, be sure
to use a 21-pin SCART
cable that is compatible
with the Y/C signal.)
Set your TV to the VIDEO
(or AV), Y/C, or RGB
mode according to the
type of your TV’s SCART
connector.
For switching the TV’s
mode, refer to the
instruction manual of
your television.
You are now ready to start the Three-Step Quick Start which begins on the next
page.
You have two ways for initial setup of your new VCR depending upon the
connection method and your TV.
If you have connected only the RF cable,
perform Auto Setup ( pg. 10).
If you have connected both the RF cable and the fully-
wired 21-pin SCART cable, and if your TV does not offer
T-VLink, etc.*,
perform Auto Setup ( pg. 10).
If you have connected both the RF cable and the fully-wired
21-pin SCART cable, and if your TV offers T-VLink, etc.*,
perform Preset Download ( pg. 11).
* Compatible with TVs offering T-VLink, EasyLink, Megalogic, SMARTLINK,
Q-Link, DATA LOGIC or NexTView Link via fully-wired 21-pin SCART cable.
The degree of compatibility and available functions may differ by system.
RF Cable
(provided)
TV Aerial
Cable
(not
provided)
21-pin SCART Cable
(not provided)
Mains Power
Cord
Mains Outlet
Back of VCR