Filter
Top Products
Filename [HRS6960E5-EN.fm]
Masterpage:Left
48 EN
Page 48 April 22, 2003 3:24 pm
SUBSIDIARY SETTINGS (cont.)
* The default setting is bold in the table below.
8 B.E.S.T.
ON
OFF
You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to
“ON” or “OFF” (
੬ pg. 26).
8 PICTURE CONTROL
AUTO
EDIT
SOFT
This feature helps you to adjust the playback picture quality according to
your preference. Normally select “AUTO”.
AUTO
: Provides the optimised picture benefits of the B.E.S.T. Picture
System.
EDIT
: Minimizes picture degradation during editing (recording and
playback).
SOFT
: Reduces image coarseness when viewing overplayed tapes
containing a lot of noise.
NOTES:
● When you select “EDIT” or “SOFT”, the selected mode will not change until you
select another mode.
● When you select “EDIT” to dub tapes, be sure to select “AUTO” after you finish
dubbing the tapes.
● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically from
“AUTO” to “NORM”.
8 AUTO TIMER
ON
OFF
When this function is set to “ON”, the timer is automatically engaged when
the recorder power is turned off, and automatically disengaged when the
recorder is powered back on.
NOTE:
For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are
disabled while the Timer mode is engaged. To disengage the timer, press
# (TIMER).
8 O.S.D.
ON
OFF
When this function is set to “ON”, various operational indicators appear on
the TV screen. Messages appear in the selected language (
੬ pg. 14, 15).
NOTES:
● When you use this recorder as the source player for editing, be sure to set “O.S.D.”
to “OFF” before starting.
● During playback, the operation mode indicators may be disturbed depending on the
type of tape being used.
8 PROG. NAVIGATION
ON
OFF
When this function is set to “ON”, the recorder stores information on the
recorded programmes. If you do not want to use the Programme Navigation
function (੬ pg. 35), set “PROG. NAVIGATION” to “OFF”.
NOTES:
● Programme Navigation is possible with the cassettes recorded with this recorder
only.
● Before recording, make sure the recorder’s clock is set correctly.
● To record the programme information in this recorder’s memory, you must continue
to record each programme for over the minimum recording time; 8 minutes for the
SP mode, 15 minutes for the LP mode or 23 minutes for the EP mode.
● Programme Navigation may not work properly depending on the tape being used.
● The programme information is stored in this recorder’s memory. If the memory in this
recorder should ever be damaged and the programme information lost, it is
impossible to restore that information.
HRS6960E-EN.book Page 48 Tuesday, April 22, 2003 3:24 PM