Filter
Top Products
basic features22
set tape speed You can change the tape speed between Standard Play (SP)
and Long Play (LP) by pressing /.
set channel position number Make sure the channel position you wish to
record is displayed. If “
TV PROG” displays “– –”, set the Channel Position number
correctly. Press
PR + or PR – button to input the channel position number on
which your recorder receives the station. Then press
OK button (or ).
set pdc mode Press PDC (number key 7) to change between ON and OFF.
Programme Delivery Control (
PDC) is a service designed to ensure that timer
recording still works in the event of a change in time of broadcast. If you set
PDC
to ON, your VCR will be turned on not by its own timer but by a signal
transmitted by the broadcaster. This means that if an advertised programme is
delayed, your VCR will still record it properly.
change stop time Press STOP + / – (number key 2 and 5). You can
compensate for anticipated changes in schedule using this method.
serial recording To set the VCR to record the same programme on a daily
(Monday-Friday) or weekly basis, press
DAILY (number key 8) or WEEKLY
(number key 9) to turn the function on. Pressing the same key again turns the
function off. You will see your selection appear on the TV screen.
capacity You can set this VCR to timer record up to eight programmes. If you
try to enter a ninth,
PROGRAM FULL appears on the screen.
satellite receiver users To timer-record a satellite broadcast using the
VIDEO Plus+ system:
• You cannot set
PDC to ON.
• You cannot timer-record the satellite broadcast received on the channel
position ‘0’ by the satellite receiver.
• Leave the satellite receiver’s power on.
Return to Normal Screen
Press PROG or OK button. PROGRAM COMPLETED appears on the TV screen for
about 5seconds, then the normal TV screen appears.)
Check the Results
Press OK button . The VIDEO Plus+ Program
screen appears.
Make sure that the preset number displayed is the
one that you want. If it is incorrect, the wrong
programme will be recorded.
errors If the PlusCode number you entered is
invalid,
ERROR appears on the TV screen.
-P1-
k: OK
PLUSCODE NO.
START
21:00
SP
DATE
25.12
56781234
STOP
22:00
VPS/PDC OFF
TV PROG
1
BBC1
-P2-
HR-S6975EK-EN/p21-28 3/12/04, 03:14 PM22