Filter
Top Products
basic features 23
Engage Timer Mode
You must now put the VCR into Timer Mode by pressing c otherwise no
recording will take place. c will appear on the display panel. Make sure that the
VCR turns off automatically. To disengage the Timer Mode, press c again.
If a video tape with the safety tab removed is loaded, c, Play indicator (,) and
Record indicator (U) will flash. Insert another tape with the safety tab in place to
record!
If no video tape is loaded, c indicator will flash. Insert a tape to record!
If the tape reaches its end during timer recording, the recording stops and “c”,
“U” and “,” on the display panel blink. Press “c” to disengage timer, then
press S/0on the VCR or on the Remote Control to eject the tape or press
othen press < to rewind the tape.
HR-S6975EK-EN/p21-28 3/12/04, 03:15 PM23