Filter
Top Products
26
ADVANCED OPERATIONS (cont.)
1 2 3
4 5 6
7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTES:
●
Before starting, make sure the
recorder is in the Stop mode.
●
If "O.S.D." is set to "ON" (
੬
pg. 39), "MARK" blinks on the
screen while an index code is being marked.
ACTIVATE INDEX SEARCH
1
Press
@
or
#
(™ or £). “™ 1” or “£ 1” is
displayed on screen and search begins in the corre-
sponding direction.
● To access index codes 2 through 9, press
@
or
#
repeatedly until the correct index number is dis-
played.
Ex.: To locate the beginning of B from the current
position, press
@
twice.
To locate the beginning of D from the current
position, press
#
once.
● When the specified index code is located, playback
begins automatically.
Current position
Index number
AB C D E F
–2 –1 1 2 3
£ 2
Looking For
The Scene
You Want
SKIP OVER UNWANTED
SECTIONS
1
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search, press PLAY.
Skip Search
30 SEC
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE INSTANT
REVIEW
1
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
● The front display panel tells you how many
programmes have been timer-recorded. If you have,
for example, 3 programmes, “REVIEW” and "3"
appear and blink. To watch the first of the 3
programmes, press REVIEW three times. The recorder
searches and begins playback automatically. You can
access a programme as far as 9 index codes away
from the current tape position.
NOTES:
●
Instant ReView is not possible while the recorder is in the
Timer mode.
●
The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Prog recording
(
੬
pg. 28).
REVIEW